| Pipe reducers come into concentric reducers and eccentric reducers. They are made of carbon steel, alloy steel, stainless steel, low temperature steel or high performance steel, etc. Standards
ASME B16.9-2007
ASME B16.25-2007
ASME B16.5-2007
EN10253-1-1999 EN10253-2-2007 EN10253-3-2008 EN10253-4-2008
DIN2605-1-1992 DIN2605-2-1995
JIS B2311-2009 JIS B2312-2009 JIS B2313-2009
GB/T12459-2005 GB/T13401-2005 GB/T10752-2005
SH/T3408-1996 SH/T3409-1996
SY/T0609-2006 SY/T0518-2002 SY/T0510-1998
DL/T695-1999 GD2000 GD87-1101
HG/T21635-1987 HG/T21631-1990 Size
Seamless elbow:1/2"～24" DN15～DN600
Welded Elbow: 1/2"～100" DN15～DN2500 Wall Thickness
sch10, sch20, sch30, std, sch40, sch60, xs, sch80, sch100,
sch120, sch140, sch160, xxs, std,sch5s, sch20s, sch40s, sch80s Materials
Carbon steel: ASTM/ASME A234 WPB,WPC
Alloy steel: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911
Stainless steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N
ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti
ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H
Low-temperature steel: ASTM/ASME A402 WPL 3-WPL 6
High performance: ASTM/ASME A860 WPHY 42-46-52-60-65-70 Surface treatment Transparent oil, rust-proof black oil or hot galvanized. Major Products Seamless pipes, Elbow, Reducer, Tee, Pipe Cap, Flange and etc... Special design is available for all the production process, according to consumer's need strictly. Specifications for Pipe Tee
| Production range | | Outside diameter | 1/2"～72" DN15～DN1800 | | Wall thickness | 2mm~120mm | | Product type | Concentric Reducer, Eccentric Reducer |
|
