Durable Lighting Switching PTC Thermistor / Chip Thermistor For Preheated Start
Quick Details
Description
Application
Specification
Switching PTC thermistors Operating Principle
The application of the PTC thermistor to achieve preheated start is as follows: Immediately after power is switched on, Rt is in normal temperature state and its resistance is far lower than the C2 resistance. The current through C1 and Rt forms a return circuit to preheat the filament. After about 0.4-2 seconds, Rt joule heat temperature exceeds Curie point Tsc and skips into high resistance state of far higher than C2 resistance. The current passes through C1 and C2 to form a return circuit, which causes L resonance and produces high voltage to light the fluorescent tube.
Circuit of PTC Thermistors Delay operation of relay
Lighting Switching PTC Thermistors Dimensional Drawings
Part |
Dimension (mm) |
|||
Dmax |
Tmax |
Fd |
F |
|
MZ31-03 series |
4.5mm |
5.0mm |
0.5mm |
5.0mm |
MZ31-05 series |
6.5mm |
5.0mm |
0.6mm |
5.0mm |
MZ31-07 series |
8.0mm |
5.0mm |
0.6mm |
5.0mm |
PTC Thermistor for Lighting Time Delay and Switching Starting Application Data Sheet
Part No. |
Switching (Centigrade) |
Resistance at +25
(ohm) |
Max. Voltage (vAC) |
MZ31-03 series |
|||
|