HDMI Extender Over single 50m UTP Cables with IR Control
I. Introduction
The HDMI extender over 1 UTP cables with IR control is the right way to send your HDMI signal over long distances.
Instead of using expensive HDMI cables, this device lets you use your existing Cat5e/ 6 cables/sockets while also
performing the same functions like transferring HDMI video and new lossless compressed (Dolby TrueHD, Dolby
Digital Plus and DTS-HD Master Audio) digital audio, all with a bandwidth up to 165MHz. And if
that weren't enough, you can use your existing remote to control your device through an IR blaster.
II. Feature
1. Compliant with HDMI 1.3, HDCP 1.1 and DVI1.0 standards.
2. Supports digital video formats in 1080p and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) Digital audio .
3. Equalizes and recovers incoming TMDS data before re-transmitting it in high quality, regardless of the incoming signal quality.
4. Supports HDMI1.4 with 3D,ARC function.
5. Super IR control system, IR transport channel can be forward or backward.
6. Support HDMI loop out.
III. Package Contents
HDMI Transmitter 1pcs
HDMI Receiver 1pcs
5V/1A DC power adaptor 2pcs
Operation Manual 1pcs
Wideband IR Tx 2pcs
Wideband IR Rx 2pcs
IV. Specification
Transmitter Ports 2 × HDMI (Female type),1x Cat5e/6,2x3.5mm phone
Receiver Ports 1x HDMI (Female type),1xRCA, 1x Cat5e/6,2x3.5mm phone
Support Resolution 480i ~1080p50/60, VGA~UXGA
ESD Protection Human Body model: ±8 kV (air-gap discharge)
±4 kV (contact discharge)
Power Supply 5 V/1A DC
Dimensions 65 mm (W) × 118mm (D) × 26mm (H)
Weight 410 g (TX+RX)
Chassis Material Metal
Silkscreen Color Black
Operating Temperature 0 °C~40 °C/ 32 °F~104 °F
Storage Temperature −20 °C ~ 60 °C/−4 °F ~140 °F
Relative Humidity 20~90 % RH (non-condensing)
Power Consumption 3.2W (Transmitter)
2.2 w (Receiver)
V. Connect and Operate
Connect the signal source such as Blu-Ray Player, Play Station 3, audio/video receiver, or
satellite receivers and computers equipped with HDMI output interfaces with a short high-speed HDMI cable to the HDMI Transmitter input. HDMI cable length should not exceed 16 ft.
Connect the HDMI Transmitter output RJ-45 ports using single Cat 5e or Cat 6 UTP cable
to included Receiver. It is strongly recommended that factory terminated cable assemblies be
used and their length shall not exceed 164 ft respectively for the extenders.
Connect the HDMI output from the Receiver to high-definition display devices such as HD-LCD, HD-DLP and HD projectors with HDMI input interfaces. Use high-speed HDMI cables
that are recommended for the distances that are required for each connection. HDMI cable
length should not exceed 16 ft.
The source can be controlled from the display. This is accomplished by using an optional IR
Receiver pigtail pointing away from the display, which can be connected to the receiver portion
of the extender. The IR Transmitter pigtail is then connected to the Transmitter of the extender
and pointed at the source.
