Cable Features
*Rated up to over 250MHz
*Meets or exceeds Cat 6 ANSI/TIA/EIA 568B . 2-1 standards.
*Easy to use pull box with bigger payout.
*Cable is marked in descending order so you always know how much cable is in the box.
*Extra headroom provides room for growth.
*Low attenuation and power-sum crosstalk.
Construction Facts
*The PVC Cable has high density polyethylene insulation.
*Longitudinal rip cord for easy jacket opening.
Cable Put-Ups:
*Cable is supplied in 1000ft increments in a pull box.
cat6 stranded unshielded Bulk cable Electrical Specification
Frequency | ATT | ACR | DELAY | NEXT | PS-NEXT | ELFEXT | PS-ELFEXT | Return Loss |
MHz | dB/100 m | dB/100 m | ns/100 m | dB/100 m | dB/100 m | dB/100 m | dB/100 m | dB |
(Max) | (328 ft.) | (328 ft.) | (328 ft.) | (328 ft.) | (328 ft.) | (328 ft.) | (328 ft.) | (Min) |
(Max) | (Max) | (Min) | (Min) | (Min) | (Min) | (Min) | ||
1 | 3.05 | N/A | 570 | 74.3 | 72.3 | 67.8 | 64.8 | 20 |
4 | 5.67 | N/A | 552 | 65.3 | 63.3 | 55.8 | 52.8 | 23 |
8 | 7.98 | N/A | 546.73 | 60.8 | 58.8 | 49.7 | 46.7 | 24.5 |
10 | 8.93 | N/A | 545.38 | 59.3 | 57.3 | 47.8 | 44.8 | 25 |
16 | 11.33 | N/A | 543 | 56.2 | 54.2 | 43.7 | 40.7 | 25 |
20 | 12.71 | N/A | 542.05 | 54.8 | 52.8 | 41.8 | 38.8 | 25 |
25 | 14.26 | N/A | 541.2 | 53.3 | 41.3 | 39.8 | 36.8 | 24.3 |
31.25 | 16 | N/A | 540.44 | 51.9 | 49.9 | 37.9 | 34.9 | 23.6 |
62.5 | 23.07 | N/A | 538.55 | 47.7 | 45.4 | 31.9 | 28.9 | 21.5 |
100 | 29.7 | N/A | 537.6 | 44.3 | 42.3 | 27.8 | 24.8 | 20.1 |
200 | 43.47 | N/A | 536.54 | 39.8 | 37.8 | 21.8 | 18.8 | 18 |
300 | 49.28 | N/A | 536.27 | 38.3 | 36.3 | 19.8 | 16.8 | 17.3 |
Electrical Characteristics
*Unbalanced to ground Capacitance Max: 330 (pf/100m) |
* Nominal Velocity of Propagation: N/A |
* Maximum Delay: 537.60 @ 100MHz (ns/100m) |
*Maximum Delay Skew: ≤ 45 (ns/100m) |
* Maximum Conductor DC Resistance: 9.38 (@ 20°C OHm/100m) |
* Maximum Operating Voltage - UL: N/A |
* Maximum DCR Unbalanced: N/A |
* Attenuation (Maximum) |
▫ 29.70dB/100m (328.1ft.) @ 100MHz |
▫ 59.68dB/100m (328.1ft.) @ 350MHz |
*1.0 - 100MHz Impedance: 100Ω ± 15% |
* NEXT (Minimum) |
▫ 44.3dB/100m (328.1ft.) @ 100MHz |
▫ 36.1dB/100m (328.1ft.) @ 350MHz |
* PS-NEXT (Minimum) |
▫ 42.3dB/100m (328.1ft.) @ 100MHz |
▫ 34.1dB/100m (328.1ft.) @ 350MHz |
* Return Loss (Minimum) |
▫ 20.1dB/100m (328.1ft.) @ 100MHz |
▫ 16.3dB/100m (328.1ft.) @ 350MHz |
Applications Supported
Network Sciences Category 6 cable is designed to support any data or voice system that is capable of running over a Category 6 system. When used with Category 6 patch panels and outlets from the Network Sciences range the combined performance exceeds the Category 6/Class D-2000 link and channel requirements. The chart below shows the performance requirements of today's networking protocols.
Protocol | Common pair | Bit Rate | Bandwidth | Cabling Class used* |
Analogue Voice Systems | 1 | Analogue | < 1MHz | Category 5 (Class D) |
Digital Voice Systems | 1 | Analogue | < 1MHz | Category 5 (Class D) |
ISDN | 1 & 3 | 64/128Kbits | < 1MHz | Category 5 (Class D) |
ICL | 2 & 4 | 1Mbits | <16MHz | Category 5 (Class D) |
10BaseT | 2 & 3 | 10Mbits | 16MHz | Category 5 (Class D) |
4/16 Mbit Token Ring | 1 & 3 | 4/16Mbits | 20MHz | Category 5 (Class D) |
100BaseT | 2 & 3 | 100Mbits | 32MHz | Category 5 (Class D) |
100BaseT4 | 1, 2, 3 & 4 | 100Mbits | 16MHz | Category 5 (Class D) |
155 ATM | 2 & 4 | 155Mbits | 100MHz | Category 5E (Class D-2000) |
AS400 | 1 & 2 | 2Mbits | <16MHz | Category 5 (Class D) |
IBM 3270 | 1 & 2 | 1Mbits | <16Mhz | Category 5 (Class D) |
Baseband Video CCTV, etc. | 1 | Analogue | <10MHz | Category 5 (Class D) |
Building Management Systems | 1, 2, 3 & 4 | Analogue | <1MHz | Category 5 (Class D) |
1000BaseTx | 1, 2, 3 & 4 | 1Gbits | 100MHz | Category 5E (Class D-2000) |
1000BaseT | 2&3 | 1Gbits | 250MHz | Category 6 (Class E-2000) |
