IEC60695 UL746A professional factory lab equipment fire hazard test needle flame tester
Introduction
Needle Flame Tester reference to IEC60695-11-5, GB/T5169.5-2008, GB4706.1-2005..
AUTO Needle Flame Tester used for lighting, low voltage electric appliance, household appliances, electric machine, motor, electric tools, electronic instrument, electrical instrument, electrical connector such as electrical and electronic equipment and parts, components of research, production and quality inspection department, also suitable for insulation materials, engineering plastics
AUTO Needle Flame Tester with predetermined size (Φ 0.9 mm) needle burner, in 45 °angle burning product,measure the fire risk by product light-off or holde burning time
Needle Flame Tester Technical parameters:
Needle burner | inner hole diameter Φ 0.5mm ± 0.1mm, Diameter,9mm≤Φ, length ≥ 35mm, stainless steel |
Burner angle | 0,°20°, 45° (adjust flame height) |
Thermocouple | Ø0.5mm Type K (Ni/Cr - Ni/Al), armored sheath can withstand temperature-40°C~ 1100°C |
Burning time | 0-999.9 s ± 0.1 s adjustable (usually selected for 30s) |
Hold Burning time | 0-999.9 s ± 0.1 s, automatic recording, manual time-out |
Flame Height | 12mm ± 1mm (with height measurement instruments) |
Flame Gas | butane gas/Butane gas, min. 95% purity (can use bottled lighter gases) |
Temperature Test Range | 0~1000°C |
Flame Temperature Requirements | from 100 °C ± 2 °C liters to 700 °C ± 3 °C time in 23.5 seconds ± 1 seconds |
Standard Copper Block | 4mm±0.01mm, weight.0.58g±0.01g before drilling. Cu-ETP |
Test process | automatic control, independent convulsions |
Chamber | ≥0.5m3 |
Control | Using single chip microcomputer + touch screen control |
Consult standard | GB/T5169.10-2006 , IEC60695-11-5:2000,UL746A |
Power Supply | 800VA ,220V, 48-60Hz |
Display panel language | English(customize available) |
Pictures Show:
Our services
1. High quality products.
2. We will take photos of your order before shipment.
3. Engineering team is professional and will provide you with good after-sales service.
4. Quality assurance is 1 year.
The advantage of our company
1. Engineering team is professional and will provide you with good after-sales service.
2. Many years of experience in foreign export.
3. Delivery time is fast, and quick respond.
4. We will send a picture of the packaging and product before shipment.
Management philosophy
1) Customers are god. We will do our best to satisfy you.
2) We will protect our reputation.
3) The quality is the most important thing.
4) We will bear a strong sense of responsibility.
Looking forward to hearing your inquiry!~Thank you!
