Metal Simple Steel Slitting Line 9CrSi For Steel Coils With Scrap Winder
- Application:CR/HRC/stainless steel /galvanized
- thickness of coil plate:0.2-2mm
- width of coil plate:1250mm
- coil weight:8MT(max)
- line speed:0-40m/min
Specifications:
|
Application: |
CR/HRC/stainless steel /galvanized and so on |
|
thickness of coil plate: |
0.2-2mm |
|
width of coil plate: |
1250mm |
|
coil weight: |
8MT(max) |
|
coil I.D: |
508 |
|
coil O.D: |
1400mm |
|
the diameter of slitting blade shaft |
120 |
|
slitting blade: |
φ120Xφ220X10 |
|
material of slitting blade: |
9CrSi |
|
the hardness of slitting blade: |
HRC58°-60° |
|
recoiler I.D: |
φ508 |
|
power: |
380V/50Hz/3Ph |
|
tolerance of width error: |
≤±0.05mm/2M |
|
line speed |
0-40m/min |
|
area of the whole machine: |
25m(L)x6m(W) |
|
Production orientation |
from left to right |
1. Hydraulic entry coil car
The car can move levelly and vertically, which is convenient for putting the steel coils into the de-coiler.
It is driven vertically by hydraulic cylinder with four guide pillars.
The level movement is driven by cycloid motor .
The capacity it can carry is 8 Tons(MAX).
2. Hydraulic cantilever un-coiler
Supporting steel rolls and uncoiling.
It can expand and shrink with hydraulic oil cylinder and fit with the inner hole of the steel coils and is equipped with supporting stand.
7.5kw motor drives the coils running and the motor can run right and left to prevent the coils running by inertia.
The capacity it can carry is 8 Tons(MAX).
3. Slitting machine
Power part: This is composed of power-stand, decelerator, 15KW direct current motor, gear distributing case, coupler, spindle, connecting-cover, side guide device, etc.
Host machine: This is composed of bottom-stand, fixed bracket, big slide, knife pivot (φ120mm, 2pcs), movable bracket, slide, the front and back adjustable device of bracket, knife pivot lifting and pressing down adjustment device, accompany of blade, separating cover, rubber band and 10 blades with the machine
It change the blades through moving out the bracket hydraulically and is very convenient and fast.
4. Scrap winder &n
