Circular Saw Pipe Cutting Machine High Speed For Carbon Steel Pipe
Quick Details
Condition: New Place of origin: Jiangsu China
Model Number: MC350D Machine Type: Pipe and Tube Cutting Machine
Raw Material: Pipe Power: Hydraulic
Certification: CE&ISO Cooling System: water cooling
Machine Overview:
MC350D Metal Pipe Cutting Machine,based on the introduction of foreign advanced technology,innovative and develop a hydraulic automatic sawing machine,Performance of their products reach the advanced level, Sawing various sectional shapes can be ordinary steel, stainless steel, copper, aluminum and other metal profiles,Especially sawing various pipe is ideal. The machine uses hydraulic control,When sawing without artificial feeding, discharging, Its workpiece clamping, release, feed, retract automatically by hydraulic control ,The machining accuracy, high efficiency, suitable for long-term continuous operation.
Cutting Quantity:
The machine is equipped with cutting the number of counters one (on the main control panel),The scheduled number of workpieces sawing input counter,The actual amount of cutting will be displayed on a small screen counter, When the actual number sawing consistent with preset number, the machine will automatically stop working, cutting the number of the actual counter is automatically reset to zero.
Technical Parameters
|
1 Cutting motor |
YD112M-4/2 3.3/4.0kw |
|
2 Voltage |
380V 50HZ(Control Line 110V50HZ) |
|
3 Water Pump motor |
40W |
|
4 Applicable Saw |
≤400 Bore 32 Pin hole 2-11×63 |
|
5 Working Pressure |
5.5MPa |
|
6 Opening of the clamp |
140mm |
|
7 Oil Pump motor |
Y90L-4 1.5Kw |
|
8 Vane pump |
VPV1-20-55 |
Configuration Introduction:
Electronic control parts:FR.L and solenoid valve are imported from Air TAC TaiwanValve:Taiwan imported hydraulic Asada
AC contactor:South Korean imported ShilinStop button and the start button is: Taiwan TiandiOther electrical accessories: Chint.
Rail: Taiwan Shangyin.
Installation and commissioning
1,The machine must be placed on level ground, four feet with bolts to secure it.
2,Line has been assembled inside the machine debugging, and the power (380V 50Hz, three-phase four current system) connected, while the machine must be grounded to ensure safety.
3,Confirm steering: lights switched on, then the pole-changing switch is turned on (set to "1" or "2" position), then depress the foot switch motor rotation direction depending on the direction of spindle rotation and cover arrows consistent, If you reverse the swap any two-phase power line phase
Operating Instructions
