Internal 55-75mm Dial Caliper Bore Gauge Spring Loaded
part No: CG-205
manufacturer: ROk International Industry Co., Limited.
Internal dial bore calipers with a 55mm to 75mm measuring range
The calipers offer internal measurement of bores with a reach of 90mm
The legs have raised contact points allowing grooves, seals or circlip depths etc to be measured
The legs of the internal calipers are sprung open and operated by the lever under the handle
Please note before using the calipers they need to be calibrated using either a setting ring, slip gauges or external mircometers
With the legs set between the known size turn the outside ring on the dial to match the size. The calipers are now calibrated to mesaure any size within its range
To measure the bore - pull the lever towards the handle and insert into the bore. Slowly release the lever and the bore measurement will be shown
High Quality Caliper - Constructed of hardened stainless steel, moulded handle and 55mm diameter dial indicator
Included with the calipers - Storage case and Instructions
Leg Reach - 70mm
Contact Point Diameter - 3mm
Resolution - 0.01mm
Dial Inside Caliper Gages 55-75mm are designed for use in measuring castings, forgings and sheet metal work. Large clearances have been provided to reach over part configurations for easy measurement of small sections.
Metric or Inch are available
Order No | Range | Resolution |
CG-205 | 55-75mm | 0.01mm |
