8000mAh Rechargeable Power Bank for vehicles and electronic device
Specification:
| Real Capacity: | 8000mAh |
| Nominal Voltage: | 12V |
| Input: | 5V/2A |
| Output: |
5V/2A --mobile phone, tablet PC, other digital devices 12V/2A-- Car Jump Start |
| Emergency Output: | 12V/200A-400A |
| Material: | ABS |
| Net Weight: | 315g |
| Dimension: | 148*73*24mm |
| Starting Current: | 200A |
| Peak Current: | 400A |
| Multi-function 1: | Car jump starter |
| Multi-function 2: | LED Light, burst flashing, SOS Signal |
| Multi-function 3: | Charger for mobile phone, Ipad, PDA, camera, MP3/MP4/MP5, PSP, car refrigerator, ect. |
| Multi-function 4: | Break vehicles' side window with Glass Breaker for emergency use |
| with accessories |
Home charger-1pc Car charger -1pc Jumper cable with clamps -1pc 4 in 1 connector-1pc |
| Cycle Life: | 3000 times |
| Warranty: | 12 months |
| Place of Origin : | Guangdong, China (Mainland) |
| Certificate: | CE,FCC,ROHS,PSE |
Quality Approve
1. CE, RoHS, FCC certified
2. In line with hardware testing standards
3. Intelligent protection circuit, safe and reliable
4. Small size, effectively extending the battery life, energy saving and environmental protection
5. Lithium-ion polymer cell used
6. Short-circuit protection
7. Over-current protection
8. Over-charging protection
9. Over-discharging protection
Features:
- Portable battery charger with charging adapters for all major electronic devices
- Compact car jump starter that can jump start your car 30 times on a full charge
- Ultra-bright LED flash light, strobe light, and SOS signal light that lasts 120 hours
- Built-in protection features: over current protection / short circuit protection / overload protection / over-voltage protection / over-charge protection
- Portable compact design that will easily fit in your pocket, backpack, or glove box for convenience
- Break vehicles' side window with Glass Breaker for emergency use
How to jump start 12V vehicle?
Step 1. Red clamp connect “+”, Black clamp connect “-”
Step 2. The plug connect the jump starter
Step 3. Start the vehicle
Step 4. Remove the plug from the jump starter
Step 5. Remove the clamps from the battery
Caution:
- Do make the blue plug into the jump start socket tightly when jump start the vehicle. If not, it can’t jump start the vehicle, and even make the joint melt.
- Do check whether the battery clamps well connected, battery connector rusted or dirty if the vehicle can not be started. Jump start again after cleaning. Do not continue to jump start if 3 times not successfully. If not, it will damage the product. Do check the vehicle for other reasons.
- Do remove the product from the vehicle within 30s after the vehicle started. If not, it may lead dangerous!
- Do not connect the two clamps. If not, it may lead dangerous.
- Do not decompose product. If not, it may lead dangerous!
