M35080V6 EEPROM ERASER / PROGRAMMER ECU Chip Tuning Tools On - board EEPROM programming
Quick Detail:
1 EEPROM ERASER / PROGRAMMER
2 Erase time to Delivery State* 1-3 seconds
3 Supported all clock rates 2.5, 5.0 and 6 MHz IC's
4 On-board EEPROM programming for M35080V6
5 4 adaptors for SO8 device
6 Read,program,erase incremental RegistersEEPROM
Description:
M35080V6 EEPROM ERASER / PROGRAMMER was been used to read, program, erase Incremental Registers EEPROM. It is easy to use windows XP/2000/98 software.
Notice:
Delivery State: The first 32 bytes (incremental registers) are set to all "0"s, 16 words at 0000 The EEPROM memory array 0020-3FFF set to all FF. The Status register set to 10
Function:
1. Read,program,erase incremental RegistersEEPROM
2. Erase time to Delivery State for M35080V6 1-10 minutes
3. Supported all clock rates 2.5, 5.0 and 6 MHz IC's
4. Erase time to Delivery State* 1-3 seconds
5. In- circuit / On - board EEPROM programming
6. On- board EEPROM programming for M35080V6
7. On board processor ATmega16 allow to Firmware Update to new versions
8. Self Check capabilities
9. 4 adaptors for SO8 device
Additional items you'll need to use this tool:
1. Host:A 32 Bit x86 based or Pentium PC with a free Com 1-8 communication port.
2. Power supply: An 12 Volt / 500 MA
