Brief Description of Mold Temperature Controller
ADDM-48 Mold Temperature Control Units(MTC) are specially custome-designed for the temperature control of compression casting. It has lots of optional fuctions and multi safety protections. The heating power is 40KW for each circuit and adjustable, SPECK high-temperature magnetic oil pump is specially selected for this series. 2*0.1M2 Plate exchanger is available for process requires Heating And Cooling. This model belong to dual-circuit temperature control, It offers the temperature range from 25°C to 350 °C.
SAFETY PROTECTIONS
- No-fuse breaker for the overcurrent phenomenon of general power supply.
- Motor reversion protection and indicator light up.
- Cooling water lacking protection and indicator light up.
- Circulating pump overload protection and indicator light up.
- BY-PASS pressure release loop for hot oil.
- Phase failure protection.
- High-voltage explosion-proof device.
- Anomaly explosion-proof buzzer.
- Prevent dry combustion device, discharge scale deposit protection.
- No-voltage exhaust protection system.
SPECIFICATION DETAILS
No. |
Part |
Specification |
Data |
1 |
|
model |
ADDM-48 |
2 |
|
power supply |
3N-380-50HZ |
3 |
|
Hot medium |
oil |
4 |
|
control mode |
PC board Self - optimized microprocessor |
5 |
|
accuracy of temp. control |
PID±1 |
6 |
|
Max. temperature |
350 |
7 |
|
Min. temperature |
25 |
8 |
|
heating power |
40KW+40KW (adjustable) |
9 |
|
heat exchange area |
0.1M2 |
10 |
Pump |
model |
TOE/CY6091 |
power |
2.8KW+2.8KW |
||
lift |
80M |
||
flow |
100L/min |
||
11 |
|
heating method |
Direct heating(Indirect cooling) |
12 |
Pipeline |
hot medium inlet/outlet |
DN25*2(adjustable) |
cooling water inlet/outlet |
DN20(adjustable) |
||
drain oil port |
DN15(adjustable) |
||
13 |
Didn't find what you're looking for?
Post Buying Lead or
contact our customer service specialist for help!
|