Digital Counter Remote Master RF Wireless remote duplicator
DIGITAL COUNTER REMOTE MASTER Digital counter Car Codes
Digital counter Car Codes features
1. Digital Counter Remote Master can be used to copy each factory
brand's remote control swiftly; including fix code, computer code, and
part of roll code.
2. Digital Counter Remote Master is suitable for the remote control and
the match of anti-theft annunciator, decoding, debugging and check.
(Including Auto theftproof implement, wireless theftproof implement,
garage door remote control, and electric control door remote control.
3. Digital Counter Remote Master is equiped with three remote control (Including size A,B, C).
4. Digital Counter Remote Master is easy to operate according to the introduction in using manual.
Digital Counter Remote Master support IC:
1. HT-12E
2. AX5326-3
3. AX5326-4
4. AX5026
5. PT2262
6. PT2242
7. HT600
8. HT680
9. HT6207
10. HT6010
11. HT6012
12. HT6014
13. MC145026
14. HT640
15. EV1527
16. 527
17. PT2260
DIGITAL COUNTER Functions:
1. Frequency indicate (25MHz-1GMHz)
2. Data Detect
3. Duplicate /learn Fixed code remote
4. Duplicate /learn part of Rolling code remote
5. Duplicate /learn part of original car keys
6. Compare data (frequency, data, etc.) between remotes after copy
7. Regenerate new remote control
8. Chinese/English bilingual support
Digital Counter Remote Master Package:
1pc x Digital Counter
2pc x Red Wires
1pc x Screw Stick
1pc x AC Adapter
Attention: No keys included in the package!
Digital Counter Remote Master user manual:
1. 4 copy styles as below
Turn on the power, press button "5" for 2 times,interface shows "remot copy"
1).press button"5" for1 time, shows "1.normal copy"
2).then press button"3" for 1 time, shows "2.Singkey copy"
3).continue to press button"3" for1 time,shows "3. MulFreq copy"
4).repeat last step, shows "4. same SYS copy"
2. normal remote copy
Turn on the power, press button"5" for 2 times,interface shows "remot copy"
1)press button "5" for more1 time, shows "1.normal copy"; When the interface shows"1. normal copy", then action as below
2).press button"5 " for1 time, shows "input 1key to", then press the
first key of original remote for1 time, the machine sounds "bee" a time,
enter into code reading;then press button"5" for 1 time, shows "input
2key to", then press the second key of original remote. Action as this
to read all keys one by one;
3).When finished original remote code reading,press button "5" for
2times,shows "input No.1 remote", means insert our new RC (remote
control) A, press button "5" for 1 time, then write the code infomation
into new remote;
4).Adjust frequency:back to interface"remot copy", press button "4" for
1time to test frequency:put the original remote on the machine and
press any key for 1time, shows the frequency. Then put the new RC A on
the machine,press key1 one time, use the non-inductive regulator action
on the white capacitance to adjust frequency fit.
5).after adjust frequency, press button "1" and button "2" at the same
time (if the remote has 5keys, just need to press the 5th key one time),
the light flash 1 time.When you press any key there is the light, means
copy successfully finished.
3.other copy method, pls action as the indication in the machine.
