18 L X 3 Cooling and Mixing Beverage Cold Drink Dispenser Machine For Party/Restaurant
Quick Detail:
Manufactured upon request, not available in stock
Power supply: 110V/60HZ/1PH,220V/60HZ/1PH
Local specific plugs of power supply wire
Heating system, mixing , spraying of each tank
Description:
2. fruit juice dispenser CE certification
3. High quality compressor lead to cooling & heating fast and stable ( cooling & heating during 25-45mins)
4. Cold drink machine with stainless iron panel complete mirror design
5. fruit juice dispenser all the part inside cold drink machine welding by copper tube , in order to Avoid rust
6. cold drink machine divided into cool & hot , cooling only , heating only
7. Stirring and Spraying design.
Application:
Specification:
|
Model |
LRSPD-18L×3 |
|
Voltage |
220-240V/110-115V |
|
Frequency |
50/60/HZ |
|
Cold poqer |
320W |
|
Heat poqer |
1500W |
|
Cold-beverage temperture |
7C-12C |
|
Hot-beverage temprture |
52C-58C |
|
Shape size |
710×440×720 |
|
Carton Packing |
750×480×750 |
|
Weight |
40 |
|
Gross weight |
42 |
Detailed Photo:
Factory show:
Application Photo:
Installing Methods:
1: To install it ,pls choose the site which is flat,fixable and can avoid the direct sunshine in sunmmer.
2:Around the juicer, should have 150mm up room to make the air circulating and make sure the machine
can run effectively.
3:Before installing, pls check the supply whether confirm the requirements or not. The power supply cable
is not too thin or too long. The cross section of cable should be 1.5-2.5mm, Voltage is mounted on the
fixed position with fuse which will keep the users safety,it must have reriable grounding. The socket
should be mounted on the fixed position with fuse which keep the machine running safety.
4;To make the fix position for juicer,should make its frond lower and back higher(to ajust the foot of
bottom can do it), then the water in the salver can flow into the box through the hose.
