PCB Pluggable Terminal Block Connector In Electronic Components
this item could be used to replace Degson
Specification of PCB Pluggable Terminal Block Connector In Electronic Components
1. Pitch: 3.50mm, 3.81mm
2. Material
Screw: M2.0 Steel Zinc Plated
Contact: Phosphor Bronze
Housing: PA66,UL94V-0
3. Electrical
Rated Voltage: 300V
Rated Current: 8A
Contact Resistance: 20mΩ
Insulation Resistance: 5000MΩ/1000V
Withstanding Voltage: AC1500V/1Min
Wire Range: 28-16AWG 0.5-1.5mm²
4. Mechanical
Temperature Range:-40℃~+105℃
Max Soldering: +250℃,5 Seconds
Strip Length: 6-7mm
Below is the PCB Pluggable Terminal Block Connector In Electronic Components for reference, more information would be sent on your request.
| Item NO. | MX15EDGKM |
| Pitch | 3.50mm, 3.81mm |
| Screw | M2.0 Steel Zinc Plated |
| Contact | Phosphor Bronze |
| Housing | PA66,UL94V-0 |
| Rated Voltage | 300V |
| Rated Current | 8A |
| Contact Resistance | 20mΩ |
| Insulation Resistance | 5000MΩ/1000V |
| Withstanding Voltage | AC1500V/1Min |
| Wire Range | 28-16AWG 0.5-1.5mm² |
| Temperature Range | -40℃~+105℃ |
| Max Soldering | +250℃,5 Seconds |
| Strip Length | 6-7mm |
| package | we packed in the standard cartons:28*28*42cm,or as your requirement. |
| Payment | 100% TT before shippment |
Use
A terminal block must first be mounted in a safe, stable location away from moisture. To use it, strip about ½ inch of insulation from the two wires you want to connect. You then insert the bare wires into the block's metal connectors and screw them down until they're securely fastened.
Promise to customers:
1)We can delivery the samples for your test free of charge
2)Our products are all guaranteed,you will have no worry to use.
3)We will delivery the order strictly as the order confirmed!
Noted:
Dear friend,thank you very much for you pay attention to PCB Pluggable Terminal Block Connector In Electronic Components ,please feel free to contact Angelo Tse at any time,I will give you a quick reply and try my best to do all the thing well.
