24VAC Hotel / Apartment Large Display Thermostat , 86×86mm Junction Box
Quick Detail:
24/110/220Vac
embeded mounting
On/off control
2pipe / 4pipe
Description:
Luxury appearance with larger digital LCD display
Soft rubber keypads and most of keypads are hidden under the cover
High reliable stand-alone microprocessor increases anti-jamming ability
Reliable DC power supply by transformer
Standard 86 × 86mm junction box installation with only 13mm thickness
Model available for 24Vac, 85-260Vac power input
Reliable output by relays
Applications:
HL2010 series thermostats adopts button-hidden fashion appearance design. The thermostats are stand-alone microprocessor based and with LCD
display, which designed to on/off control the fans, valves, dampers or electric heaters in fan coil units,
air-conditioners and heating applications.
Models are available for heating/cooling/ventilating control of 2-pipe or 4-pipe fan coil units.
The fan speed can be manually controlled by the fan speed control push button. It is wired to run high
/medium/low speed continuously or to automatically change the fan speed, while with other models there
is a choice of running the fan continuously, or cycling it with the thermostat.
Specifications
Power Supply: 220Vac(or any other volt.) ±10%, 50/60Hz
Setpoint Range: 5~35
Setting Unit: 0.5/ step
Accuracy:± 0.5
Display:63×45mm LCD display
System Adjust: 6 soft buttons for Power, Mode, Clock,Fan speed, Up and Down
Mode Setting: Heating, Cooling and Ventilating
Fan Speed Adjust: High, Medium, Low and Automatic fan speed control
Cycling Fan Control: Fan cycled running with thermostat
Control Performance: ON/OFF control
Differential:1
Thermostat Output:
SPST relay for 2-pipe configuration
2 SPST relay for 4-pipe configuration
Electrical Rating: 0.8A run, 5A inrush;
Temperature Sensor: NTC Thermistor 100K
Enclosure: Fire retardant PC ABS
Minimum Operational Life:
Thermostat contacts: 100,000 cycles
Remote Controller(optional): Infrared Remote Control
Backlight Function(optional): Blue light
Dimensions:86×86×13mm (W×H×D)
Hole Pitch: 60 mm
Environmental requirements:
Operating temperature range 0 ~ 40,
Humidity range 5 ~ 95 %RH (non-condensing)
Wiring:
Screw-in terminals, each terminal capable of accepting
16 AWG, 18 AWG, 1.25mm2 or 0.75mm2 wires
Embeded Mounting:
