Overview
To deliver triple-play services to the subscriber in Fiber-to-the-Home or Fiber-to-the-Premises application, the GPON ONT OnAccess G600-1G for SFU (Single Family Unit) incorporates interoperability, key customers' specific requirements and cost-efficiency.
Equipped with ITU-T G.984 compliant 2.5G Downstream and 1.25G Upstream GPON interface, the OnAccess G600-1G ONT supports the full Triple Play of services including video, and high speed internet access.
Compliant with standard OMCI definition, ONT OnAccess G600-1G is manageable at remote side and supports the full range FCAPS functions including supervision, monitoring and maintenance.
Services
(1) Data
The OnAccess G600-1G ONT is delivered with one 10/100/1000 Base-T Ethernet data interface, supporting:
Auto-negotiation and MDI/MDIX auto-sensing
Built-in layer-2 switch
Advanced data features such as VLAN tag manipulation, classification, and filtering
(2) Voice
To enable VoIP access, the OnAccess G600-1G ONT supports interfacing external IAD box or Home Router with voice capability through the Ethernet Interface.
(3) Video
The OnAccess G600-1G ONT supports video contents delivered in the form of data (by multicast or unicast).
In case where multicast technology is used for delivering video contents through data channel, the ONT supports the dedicated multicast GEM port on the Downstream. So the video contents are received and processed by all the ONTs through the unified channel and this greatly improves the bandwidth efficiency.
In addition, the ONT supports IGMP snooping function to be applied for further optimization. When IGMP snooping is enabled, the ONT monitors the member joining and leaving activities at the Ethernet service port, and then selectively delivers the multicast streams.
Interfaces
Type | 10/100/1000 Base-T interface |
OnAccess G600-1G | 1 |
Specifications
(1) Dimensions
120mm x90mm x33mm (W x D x H)
(2) Power Supply
+12V (feed via external AC/DC adapter)
2-PIN power adaptor input
Dying Gasp support
Power switch
Power Consumption: Less than 4W
(3) Working Environment
Temperature: 0℃ ~ 50℃
Humidity: 5% ~ 95% relative humidity
(4) Safety & EMI
CE certificate
FCC/UL compliant
(5) Environmental Directive
RoHS6
(6) Installation
Wall mounting & desktop mounting
(7) GPON Interface
Compliant with ITU-T G.984 GPON standards
SFF type laser, SC/APC connector
1.244 Gbps Burst Mode Upstream Transmitter
2.488 Gbps Downstream Receiver
Compliant with ITU-T G.984.2 Amd1, Class B+
+1dBm ~+5dBm launch power, -28dBm sensitivity, and -8dBm overload
Compliant with ITU-T G.984.2 Amd1, Class C+ (optional)
+1dBm ~+5dBm launch power, -30dBm sensitivity, and -8dBm overload
Wavelengths:
US 1310nm, DS 1490nm
Laser compliant with FCC 47 CFR Part 15, Class B, and FDA 21 CFR 1040.10 and 1040.11, Class I
Support G.984.5 Blocking Filter
Multiple T-CONTs per device
Multiple GEM Ports per device
Flexible mapping between GEM Ports and T-CONT
Activation with automatic discovered SN and password in conformance with ITU-T G.984.3
AES-128 Decryption with key generation and switching
FEC (Forward Error Correction) in both directions
DBA reporting by piggyback reports in the DBRu (mode 0 and mode 1)
802.1p mapper service profile on U/S
Mapping of GEM Ports into a T-CONT with priority queues based scheduling
Support Multicast GEM port and incidental broadcast GEM port.
(8) Ethernet Interface
10/100/1000 Base-T interface with RJ-45 connectors
Ethernet port auto negotiation or manual configuration
MDI/MDIX automatically sense
Hardware priority queues on the downstream direction in support of CoS
802.1D bridging
Virtual switch based on 802.1q VLAN
VLAN tagging/detagging per Ethernet port
VLAN stacking (Q-in-Q) and VLAN Translation
IP ToS/DSCP to 802.1p mapping
Class of Service based on VLAN-ID, 802.1p bit, ToS/DSCP
Marking/remarking of 802.1p
IGMP v2/v3 snooping
Broadcast/Multicast rate limiting
(9) LEDs
POWER
ALARM
CONNECTION
ETHERNET
(10) OAM
Standard compliant OMCI (the embedded operations channel) interface as defined by ITU-T G.988
Provisioning all kinds of services including Ethernet etc.
Alarming and performance monitoring
Remotely software image download over OMCI, as well as activation and rebooting
Hold two software sets with software image integrity checking and automatic rollback
