Plz feel free to contact: frank at cqbluejay.com
Specifications
Maximum radio range: 500Meter(outdoor)
Maximum 100 remote unit without repeater
Probe accept digital sensor and PT100
Features
• Low cost 433MHZ temperature monitor device, easy to build monitor network via multi-point monitoring
• Maximum radio range: 2KM(outdoor)
• Maximum 100 remote unit without repeater
• 3500mAh battery provide 3 million times data upload
• Indication and control accuracy 0.5C, high measurement.
• Accuracy ±1%FS (Depends on the sensor).
• Built-in digital filter reduce interfere, remote sensing unit with 64 communication channels, support FHSS technology to prevent signal interference and substitution
• Support temperature/humidity sensor, or integrate sensor
• Output and alarm format can be set by user.
• Software can read and analyze the monitor data.
Specification
Interface parameters | |
Wired port | RS485 industrial serial interface, for send the received data (Ethernet option) |
Wireless port | MICO RACE wireless interface, For receiving the data of the wireless remote sensing unit |
Remote sensing unit management | Maximum 100 unit, depending on the data upload frequency and wireless setting |
Wireless parameter | |
Operating frequency | Standard 434MHz |
240~930MHz option | |
Channel | 64 |
Spread-spectrum mode | Frequency hopping or fixed frequency (software configuration) |
Wireless rate | 2.4~256 kbps (software configuration) |
Communication distance | 400M (7dbm,5mw) |
1300M (13dbm,20mw) | |
2000M (16dbm,40mw) | |
Communication protocol | MICO RACE protocol, support routing, network |
Mechanical parameters | |
Dimension | 82mm×60mm×27mm |
Shell material | Aluminum (shielding) |
Surface treatment | Oxidation (corrosion resistant) |
