Black 5000K White CREE XM-L2 U2 LED Underwater Photography Light 6500 Lumens

Trade on HiSupplier, Worry Free Guarantee
Trading safety, secure your money, lower the risk, protect both buyers and suppliers
HiSupplier is a Chinese multinational company in U.S, it helps to coordination and order landing.
More ›
  • Product Details
  • Company Profile
  • Product Reviews

DG70W Goodman Handle Underwater Photography Light 6500 Lumens with Red and UV Light

 

 

PRODUCT SPECIFICATIONS:

 

Model DG70W Goodman Handle Diving Video Light 
Bulb White CREE XM-L2 U2 LED *12 (max 6500 Lumens); CREE XP-E N3*4 (wavelength 620nm, max 400 Lumens)
Modes High>Medium> Low>Red> off
Runtime High (1.5h); Medium  (3.0h); Low (5.0h); Red (8.0h)
Color temperature 5000K (white light)
Reflector No hotspot design, no reflector
Lens 5mm Polycarbonate Board
Body material Durable aircraft-grade aluminum
Angle of light beam 120°
Surface treatment Premium Type III hard-anodizing
Color Black
Battery Rechargeable Li- ion battery pack (18650 battery*6)
Battery Indicator 100%-50%: Green; 50%-30%: Yellow; 30%-10%: Red; Below 10%: Red Flashing; Below 5%: switch off
Charging Can be charged directly on the light, with battery over-discharging protection, polarity reversing protection
Fully charging time 8-10h
  With gas release valves
Operation voltage 9V to 13V
Waterproof 200 meters underwater
Dimensions 213.5mm (length)* 78.0mm (dia. of head)
Weight 1140 grams (with battery pack)
Underwater Weight 560 grams (with battery pack)
Impact resistance 1.5M

 

BATTERY CHARGING

  1. Plug the charger in the wall power socket, the indicator light is green in the free-load status.
  2. Plug the charger in the ports on the light. (the positive and negative polar doesn’t matter, both ways work.)
  3. The indicator light is red if the battery is not fully charged; it will turn green after fully charged.
  4. Take out the charger and use the light.

 

ON/OFF

 

Push the switch to turn it ON.

 

 

MODES CHANGING

 

Successive push the switch ON-OFF within two seconds to cycle through High, Medium, Low, Red, OFF.

 

 

SCUBA DIVING APPLICATION

 

Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.

KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.

 

CAUTION

 

If the light is not to be used for some time, remove the batteries to prevent possible leakage or corrosion. Please put the switch sleeve on light head during transportation to prevent it from misoperation.

 

The Light CAN’T be used more than 5 minutes above water.

 

If the switch gets stuck, please put some washing-up liquid in the slot of the switch and push the switch back and forward several times till it move smoothly again, then clean the light in the fresh water.

 

WARRANTY RETURN POLICY

 

Please contact your local distributor or retailer for information on how to handle your warranty items.

 

REPLACEMENT PARTS

 

CAT#             DESCRIPTION

DG708           O-ring

DG709           Lens

 


Send message to this supplier
Mr. Alex
Tel: 86-755-29724966
Enter between 20 to 3,000 chatacters.
Contact Method
China Fountain Lights Online Market
No. 115, Xingfu South Road, Shenzhen, Guangdong, China (Mainland)
Related Products
Didn't find what you're looking for? Post Buying Lead or contact our customer service specialist for help!
Buyer Help Center