Energy Saving Flat Panel Led Lights , 220v 40w 5500K Backlight
LED Panel has been design to work with conventional Grid Panel Light with fluorescent tube
fixtures. To replace the short lived fluorescent lamps that are typically used in interior lighting.
The LED Panel can be used to retrofit existing fluorescent tube grid light installations in all types
of applications .
Features:
- Energy Saving. Saving 55%-70% electricity cost to traditional Panels.
- Advanced super longlife and stable driver.
- Professional thermal management.
- Instant on, no warm up time required.
- No noise, no flickering.
- No UV or IR radiation in the beam, mercury free.
- Anti-shock, anti-moisture.
- Aluminum alloy 6063 body and leading light transmitting Optical PMMA cover.
- Exquisite small appearance. Easy to install with mounting brackets.
- Eco-friendly. No mercury and other harmful materials
- No delay on start.
- Long life span, longer than 40,000H
Electrical Characteristics at TA = 25°C :
Some kinds of panels:
Storage condition:
The LEDs better be kept at <30°C & < 60%RH.
Please avoid conditions which may cause the LEDs being corroded or discolored. The corrosion or discoloration might lower solderability or affect optical characteristics.
Please avoid rapid transition in ambient temperature, especially in high humidity environments where condensation can occur.
Products diagram:
Package show:
Installation Guide :
Certification:
Attention on Installation:
1. Panel lights should be installed by trained electronic technician.
2. Please check all the accessories when open the cartons.
3. The distance between the light and any flammable materials must be more than 0.2m. The distance between the upper part of the installed light and the ceiling must not be less than 2 cm. Don not install into ceilings or walls that contain heat source. The main cable must not connect with the low voltage cable or the surface-mounted lights.
4. Guide the lights' connecting cables through the drilled hole, and fix the surface-mounted lights with the pre-fitted clips. Make sure that these are securely connected to the base material.
5. When laying the cables, make sure
