Product Description
High Quality Custom MIM Products For Medical Knife Handle
1. We specialized in the PIM technology of research and development, production and service,
which include MIM Part and so on.
2. Process:powder metallurgy for MIM part.
3. High precision,100% quality with competitive price.
4. We can make the mim part according to customers' drawings or requirement (OEM).
5. Short delivery time.
Products Show
Products Show
______________________—
Material
The materials of mim
MIM is applicable to wide range of materials which includes low alloy steel, stainless steel, tool steel, nickel-based alloys, tungsten alloy, carbide, titanium, magnetic materials, Kovar alloy and fine ceramics, etc.
Table 1 Typical MIM materials and applications:
Table 2 Typical properties of several MIM materials:
Process Description
_____________
Post Process
_____________
| Cosmetic Base Post Process information are Subject to Material & Requirements | ||
CNC Post Process | Some complex shape product need CNC/ Machining during the post process,this could be addition but it is not important that every part must need it. This depend on part's requirements. | |
| PVD | Possible to get the different PVD color such as White,Black,Golden,Brown,Green,Blue ect^ | |
| Surface Finish | MIM product are good to get the required surface finish such as hair line surface finish,brush finish,sand blast mirror surface finish ect | |
Plating | MIM material can be readily plated or surface treated with standard process used on wrought material with no need for special surface preparation.Examples of some plating and surface treatments offered are: electrolysis nickel,chrome,zinc,chromatic,nickel teflon,black oxide and passivisation. | |
Why MIM?
Company Information
Overview
_____________
Professional PIM turnkey solution provider since 2004
15+ patents of invention in binders and process design
700+ employees, 10%+ from engineering and R&D
Over 250 Tons annual power consumed capability
35,000 square meters of facility
Your inquiry will be replied in 24 hours in workday.
Well trained and with experienced staffs to answer your questions.
Your information for us will be protected strictly.
Products could be finished as per customer's samples or drawing.
Could be packed as customers' requirements.
We sincerely welcome all customers to visit our factory for future business relationship and mutual success!
Obtained ISO9001: 2000 version quality system certification in August 2007.
Obtained ISO9001: 2008 version quality system certification in October 2010.
Obtained QC080000:2005 version certification in October 2010.
Obtained certifications of TS16949 in April 2013.
All products have SGS or CTI report, conform to Environmental request of RoHS. Material has test report of REACH.
Conception modeling and optimize
design for manufacturing assessment
Cost-effective modeling
Tooling design and fabrication
Fast prototyping
Failure mode effective analysis
Sample qualification by 3rd party testing
NPI management
Process fine-tune
Self-motivated cost down plan
Capacity and delivery balancing
Maching,laser welding
Surface finish
Heat treat
Final assembly if necessary
Cost-effective
Geometry complex
Axisymmetric,nonsymmetrical,prismatic,square,and freeform features
Cantilever and nonsymmetrical shapes
Stiffening ribs and locator features for assembly
Protrusions,bosses,and studs
Most hole shapes are allowed, including blind and through holes
Holes at angles to one another
Undercuts, grooves,slots,depressions
External teeth,external or internal threads
Knurled and waffle surfaces
Part number or identification logo created by the mould
Inside closed cavities
Undercuts on internal bores
Very shape corners or design-desired radius greater than 0.05mm
Long pieces without a draft or taper to allow ejection
Technology Strength
_____________
Business Distribution
_____________
Our Service
Best customer service is available:
Customer Show ( Customer Approval Show Only )
_____________
Note: Sofine PIM is not authorized to use their names, these names are just to shows our skill level and products standards.
Quality Assurance
_____________
Product Management
_____________
ESI ( Earlier Supplier Involve )
Tooling Design & Fast Prototyping
Net-shape for Precise Part
Secondary Operations
Design Guideline
_____________
Fast assessment of a part suitable for metal or ceramic injection molding based on:
Normally yearly demand over 20k and typical weight from 0.02-50g will be highly cost reduction when tooling cost and raw material cost been considered.
PIM technology is specially profit for component has holes,slots,ribs,protrusions,and multiple features.The typical max outlet is range from 25mm to 35mm,wall thicjness 0.08 to 10mm.
Several aspects of the PIM component design improve the ease of manufacturing,and there are a number of design features that should be avoided. These are categorized as follows:
Allowed design features
Features to avoid
Packaging & Shipping
Packaging:
Standard sea or air packing for powder metallurgy products,such as carton,wooden box, Retail packing available. We can custom anything about PIM with your company logo as your request.
Shipping:
Sea,Air,TNT,UPS,EMS,DHL,FEDEX
FAQ
Q: What is MIM technology ?
A: MIM (Metal Injection Molding) is a manufacturing technology that combines the shape making complexity of Plastic Injection Molding with the material flexibility of Powder Metallurgy.
If you want to know more about PIM, please click here what's PIM.
