| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | |||||
| DN | DASH | A | C | D | H | L | ||
| 88141-10-08 | 5/8" | 12 | 08 | 59 | 34.2 | 27.8 | 24 | 6.7 |
| 88141-10-10 | 5/8" | 16 | 10 | 70 | 34.2 | 27.8 | 25.3 | 6.7 |
| 88141-10-12 | 5/8" | 20 | 12 | 76 | 34.2 | 27.8 | 29 | 6.7 |
| Note:1. For use with braided hoses; 2.If use with spiralhoses, hose fitting series number is 88112-xx-xx. | ||||||||
1) FERRULE
FERRULE for SAE100R1AT/EN 853 1SN HOSE
FERRULE for SAE100R1A EN 853 1ST HOSE
FERRULE for SAE100R2AT/DIN20022 2SN HOSE
FERRULE for SAE100R2A/EN853 2SN HOSE
FERRULE for SAE100R1AT-R2AT,EN853 1SN-2SN and EN 857 2SC
FERRULE for 4SP, 4SH/10-16, R12/06-16 HOSE
FERRULE for 4SH, R12/32 HOSE
2) SWAGED METRIC FITTINGS
Metric Flat Seal Fittings
Metric Multiseal Fittings
Metric 60°Cone Seal Fittings
Metric 74°Cone Seal Fittings
Metric 24°Cone O-RING Seal L..T. Fittings
Metric 24°Cone O-RING Seal H.T. Fittings
Metric Standpipe Straight Fittings
JIS Metric 60°Cone Seal Fittings
3) SWAGED BRITISH FITTINGS
BSP O-RING Seal Fittings
BSP Flat Seal Fittings
BSP Multiseal Fittings
BSP 60°Cone Seal Fittings
BSPT Fittings
JIS BSP 60°Cone Seal Fittings
4) SWAGED AMERICAN FITTINGS
SAE O-RING Seal Fittings
ORFS Flat Seal Fittings
NPSM 60°Cone Seal Fittings
JIC 74°Cone Seal Fittings
NPT Fittings
SAE Flange L.T. Fittings
SAE Flange H.T. Fittings
5) STAPLELOK FITTINGS
BANJO
DOUBLE CONNECTION
INTERLOCK HOSE FITTINGS
6) METRIC ADAPTERS
Metric Thread O-RING Face Seal Adapters
Metric Thread Bite Type Tube Adapters
Metric Thread 74°Cone Flared Tube Adapters
JIS Metric Thread 60°Cone Adapters
7) BRITISH ADAPTERS
BSP Thread 60°Cone Adapters
JIS BSP Thread 60°Cone Adapters
BSPT Thread Adapters
8) AMERICAN ADAPTERS
ORFS ADAPTERS
JIC 74°Cone Flared Tube Adapters
NPT Thread Adapters
Split Flange 100° Tube Elbow (SAE Code 61)
Split Flange 110° Tube Elbow (SAE Code 61)
Split Flange 135° Tube Elbow (SAE Code 61)
Male Pipe (NPTF) Rigid
British Standard 60° Cone (BSPP) Male Pipe Rigid
FOR-SEAL Male Rigid
Male Pipe Swivel
SAE 37° Male Rigid
Male Straight Thread O-Ring Rigid
JIC 37° Female Swivel(Exceptions noted)
Female Swivel DIN Universal Seat l. Rh. (Light) (DIN 3901/3902)
Female Swivel DIN 24° Seat s. Rh. DKO (Heavy)
Female Swivel 30° Flare Metric Thread (Komatsu, Linkbelt, etc.)
British Standard (BSPP) 60° Cone Female Pipe Swivel
Female FOR-SEAL Swivel Straight
British Standard 60° Cone (BSPP) Female Swivel 45° Tube Elbow
Split Flange 22-1/2° Tube Elbow (SAE Code 61)
JIC 37° Female Swivel 45° Tube Elbow (Refer to Footnotes)
Split Flange 30° Tube Elbow (SAE Code 61)
Female FOR-SEAL Swivel 45° Tube Elbow
JIC 37° Female Swivel 60° Tube Elbow
Split Flange 45° Tube Elbow (SAE Code 61)
Split Flange 45° Tube Elbow (SAE Code 62)
Split Flange 60° Tube Elbow (SAE Code 6
British Standard (BSPP) 60° Cone Female Pipe Swivel 90° Elbow
JIC 37° Female Swivel 90° Tube Elbow (Refer to Footnotes)
Female FOR-SEAL Swivel 90° Short Drop Tube Elbow
Female FOR-SEAL Swivel Long Drop 90° Tube Elbow
Split Flange 90° Tube Elbow (SAE Code 61)
Split Flange 90° Tube Elbow (SAE Code 62)
Design and Construction
Forging and maching process for shaped products of elbows, tees and crosses, while cold drawn barstock is for the staights.
Most of our Connector products are made of carbon steel, brass, but also they can made of stainless steel or other material under the drawing of customers.
Finish
Zinc plating with silver chromate (zinc chromium 6 free) is used on all standard steel products. Stainless steel fittings are passivated.
Zinc and Nickel plating, electroless Nickel plating are also alternative option.
High Quality Standards
As an ISO 9001 certificated manufactory, we ensure that our design and manufacturing processes are the highest quality by maintaining proper certification and in-house inspections.
Under the requirement of ISO, we have a rotating gage calibration schedule to make sure the dimensions of each fitting component is 100% accurate based on specified measurements.
We have a professional quality inspection team. Individually trained employees control the manufacturing process with strict statistical analysis and control. We can ensure that each identical fitting component you order is true to the design specifications.
Packaging and Shipping
All Huayan orders are packaged in-house by our employees in strong cartons wrapped in protective caps. All packages are clearly labeled with text and bar information. Then we will put boxes into an wooden case with a big plastic bags.
As usually we delivery order 45-60 days after the order. Customers may also inquire about our Just-In-Time manufacturing process or expedited manufacture and shipping for products needed within 24 hours.
Customer Service
Our website will also help guide you through the various metal types of hydraulic fittings and more. Provide us with a faxed or email sketch of your required hydraulic fitting components along with the desired quantity and we will be able to give you a quote within 24 hours.
Thank you for visiting Hua Yan Hydraulics!
