100M / 1000M Power Over Ethernet , PoE PSE Media Converter IEEE802.3af

100M / 1000M Power Over Ethernet , PoE PSE Media Converter IEEE802.3af

Key Features

-10/100/1000Base-TX UTP to 1000Base-FX fiber media convertion
-IEEE802.3at / IEEE802.3af PoE PSE compatible
-Built-in AC/DC power supply
-Over-current protection
-choice of SC, LC, BiDi or other connectors for multimode and singlemode
-DIP switch to set different configurations
-LFP (Link Fault Pass-through) support

FR220 series is a 10/100/1000Base-TX to 1000Base-FX (also can be forced to
100Base-FX) media converter, which allows two types of network segment to be
connected easily. Complied with IEEE802.3at or IEEE802.3af standard, the AC/DC
powered PoE media converter is a Power Sourcing Equipment (PSE) which combines
data transfered over a fiber optic link with 48V (or other voltage) power supply,
providing power to IEEE802.3at or IEEE802.3af powered device (PD) over
CAT5e/CAT6 UTP cable (cable length up to 100meters / 330feets). The converter
includes a single port PSE controller, which offers PD signature sensing and power
monitoring features. Other features include over-current protection, LFP function,
etc. The LFP (Link Fauit Pass-through) allows the media converter to monitor both
the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one
media port, the converter will automatically disable the TX signal to the other media
port, thus passing through the link fault.

Technical Specifications:

Data Rates:
- 10/100/1000Mbps
(IEEE802.3U IEEE802.3z 1000Base-Tx)
- 1000Mbps (1000Base-FX) or
100Mbps (100Base-FX)
 

Input Power Requirements:
- Input voltage ........................... 100 VAC to 240 VAC
- Input frequency ................................. 47 Hz to 63 Hz

Power over Ethernet Output:
- Pin Assignment and Polarity
For IEEE802.3af standard:……1/2 (V+),3/6 (V-)
For IEEE802.3at standard (30watts maximum):
……………………………...…1/2 (V+),3/6 (V-)
For IEEE802.3at standard (50watts maximum):
……………………..…1/2/4/5 (V+),3/6/7/8 (V-)
- Output Power…..please refer to ordering information
- Efficiency ....................................................75% min
- Short circuit protection........................ auto recovery
- Over current protection ....................... auto recovery
 

Environmental Conditions:
- Operating temperature ....................... …0 to 50
- Cooling ........................................ free air convection
- Storage temperature ...................... -20 to +85
- Operating Humidity .......90% max, non-condensing
 

Mechanical Specifications:
- Case Material...........................Iron
- Case Color...........................Black
- Net Weight...........................560g approx. / unit
- Dimensions.................110(W) x 40(H) x 140(L) (mm)
Do not include transceiver length
 

Connectors:
- AC Inlet...........................IEC-J-4
- LAN...........................Shielded RJ-45
- Fiber........................see ordering information
Warranty : 1 years hardware warranty
*Specifications subject to change without notice.

Ordering Information:

*XX-XXX: supports optic connector / fiber type and distance. For more details,
please refer to the list below or contact us.