.jpg)
Features:
1) The machine tool is mainly used to turning inner and outer cylindrical surface, end surface, taper surface, arc surface, thread disk, and shaft type ets., with highly efficient and accurate working. The tool is adopted 4 position motor tool rest and 3 position Gang-type tool apron (or tool is adopted gang-type tool apron, it can be fitted 6-8).
2) The CNC control is adopted with adopted GUANGZHOU CNC 980TA/TD system or KND-100T system and be fitted with different CNC system according to customer's requests. The spindle drive speed is adjusted by alterantion and frequency conversion, it realized permanent speed turning. The machine tool is adopted sliding guide way with a film of pasted plastic (TSF), the film is with good wear resistance, good contact rigidity, quick movement and steady accuracy. The leading screw is in center type (it is fitted centre of bed), tongue was eliminated, transmissive stability was raised. The lathe is adopted whole modular cast, it is treated aging, so that cast is not deformation. The lathe is with wider bed, with this result supporting rigidity increase, and raise turning stability. Therefore the lathe can be strong turning. The leading screw of bed was protect with straight plate (non-folding protective shield), as a result protection of water and protection of chips was raised. The machine tool guide-way and ball leading screws are both lubricated periodically.
3) The spindle supporter is adopted with pre-loading accurate and angular contact ball bearings (assembly by bearing works), and with double cylindrical roll bearing. It can be acquired to optimize compound with high precision, high rigidity high load bearing ability and high turning speed.
4) The machine tool has been fitted hydraulic tank, it is fitted Φ160mm hydraulic chuck with though hole or hydraulic-clamping collets chuck device, it is provided with hand tailstock (it can be fitted hydraulic tailstock too), and can be fitted in the form of weight or hydraulic automatic feeding support device too, and so it adapts process automation, it is adaptable and directionality are more than even increase. The machine tool is compact construction, occupy small area, convenient for operation.
Specification:
1) The machine tool is mainly used to turning inner and outer cylindrical surface, end surface, taper surface, arc surface, thread disk, and shaft type ets., with highly efficient and accurate working. The tool is adopted 4 position motor tool rest and 3 position Gang-type tool apron (or tool is adopted gang-type tool apron, it can be fitted 6-8).
2) The CNC control is adopted with adopted GUANGZHOU CNC 980TA/TD system or KND-100T system and be fitted with different CNC system according to customer's requests. The spindle drive speed is adjusted by alterantion and frequency conversion, it realized permanent speed turning. The machine tool is adopted sliding guide way with a film of pasted plastic (TSF), the film is with good wear resistance, good contact rigidity, quick movement and steady accuracy. The leading screw is in center type (it is fitted centre of bed), tongue was eliminated, transmissive stability was raised. The lathe is adopted whole modular cast, it is treated aging, so that cast is not deformation. The lathe is with wider bed, with this result supporting rigidity increase, and raise turning stability. Therefore the lathe can be strong turning. The leading screw of bed was protect with straight plate (non-folding protective shield), as a result protection of water and protection of chips was raised. The machine tool guide-way and ball leading screws are both lubricated periodically.
3) The spindle supporter is adopted with pre-loading accurate and angular contact ball bearings (assembly by bearing works), and with double cylindrical roll bearing. It can be acquired to optimize compound with high precision, high rigidity high load bearing ability and high turning speed.
4) The machine tool has been fitted hydraulic tank, it is fitted Φ160mm hydraulic chuck with though hole or hydraulic-clamping collets chuck device, it is provided with hand tailstock (it can be fitted hydraulic tailstock too), and can be fitted in the form of weight or hydraulic automatic feeding support device too, and so it adapts process automation, it is adaptable and directionality are more than even increase. The machine tool is compact construction, occupy small area, convenient for operation.
Specification:
Main Specifications | |
Max. swing dia. over bed | Φ380mm |
Max. swing dia. over carriage | Φ180mm |
Max. length of work piece | 300mm |
Max. distance between centers | 450mm |
X-axis stroke | 600mm |
Y-axis stroke | 500mm |
Rapid transit | 7.6-12m/min |
Spindle | |
Spindle nose flange | A2-5 |
Dia. of spindle bore | Φ55mm |
Taper of spindle bore | 1:50 |
Range of spindle speeds | 100-4000r.p.m. |
Max. range of collet chuck | Φ45mm |
Tool system | |
Max. size of tool shank(W*H) | 20*20mm |
Tail stock | |
Taper of bore in tailstock center sleeve | Morse4 |
Max. travel of bore in tailstock center sleeve | 150mm |
Motor power | |
Spindle motor power | 4KW |
Hydraulic pressure pump motor | 1.5KW |
Power of cooling pump motor | 120(250)W |
Feed | |
X-axis serve motor | 1.0KW(4N.M.) |
Y-axis serve motor | 1.5KW(6N.M.) |
Position accuracy | |
Position accuracy | X direction 0.006mm,Z direction 0.008mm |
Repetitive position accuracy | X direction 0.005mm,Z direction 0.007mm |
Machining precision | |
Roundness | 0.002mm |
Cylindricity | 0.005mm |
Main function of CNC control(GSK980TA) | |
Least input increment | X:0.0005;Z:0.001mm |
Axes controlled | 2 |
Axes simultaneously moved | 2 |
Lineal and arc interpolation | |
Screw truing-metric/inch threads and taper threads | 0.01-12mm |
Tool with long angular arrangement and long offset | |
Definition of coordination system-automatic, machine, funning, partly | |
Others | |
Gross weight of machine | 2.38T |
Net weight | 2.2T |
Size of packing(L*W*H) | 2200*1470*2000mm |
Accessories | |
Hydraulic tank | 1 PCS |
Coolant device | 1 SET |
Water tank of save cutting fluid | |
Chip tank | |
Headstock center | 1 PCS |
Tailstock center | 1 PCS |
Morse taper shank(2#) | 2 PCS |
Drive chuck | 1 PCS |
Alarm light | 1 PCS |
Accessorial tool | 1 SET |
4 motor tool rest | 1 SET |
Tool apron with hole | 3 PCS |
Cutter sleeve of hole cutter arbor | 1 PCS |
Chuck with through hole(Φ160,holeΦ45) | 1 PCS |
Optional accessories | |
Collet chuck sleeve and collets chuck, special pull rod | |
Special apparatus and collets chuck special pull rod | |
Tool apron | |
Chuck without thought hole | |
Feeding support device in the from of weight | |
Hydraulic automatic feeding support device | |
.jpg)
.jpg)
.jpg)
.jpg)
