.jpg)
Features:
1) CK6145A type CNC controlled lathe is used to turning inner and outer cylindrical surface, end surface, taper surface, arc surface and thread of shaft etc., with highly efficient and precision working. The tools can be fitted 8-12 position motor turret head type (or fix hydraulic turret head type by customers election), it also is adopted gang-type tool apron, turning tools can be fitted 6-8. The CNC control is adopted with GUANGZHOU CNC 980TA/TD system or KND-100T system and be fitted with different CNC system according to customer's requests. The spindle drive speed is adjusted by alterantion and frequency conversion, it realized permanent speed turning.
2) The lathe adopts 30ºinclined bed, with high rigidity, easy removal of chips, and convenient for observation. X and Z axes guide ways are adopted HTPM oversize with pre-loading lineal and rolling guide-ways. X and Z axes leading screws are adopted bigger diameter with 2 gradation accuracy ball leading screws, the accuracy of leading screws is most high grade in domestic by made in HANJINAG screw & guide works. The screw is in center type (it is fitted in center of bed), torque was eliminated, transmissive stability was raised. The lathe is adopted whole modular cast, it is treated aging, so that cast is not deformation. The lathe is adopted wider bed, with this result supporting rigidity increase, and raise turning stability. Therefore the lathe can be strong turning. The leading screw of bed was protect with straight plate (non-folding protective shield), as a result protection water and protection of chips was raised. The machine tool guide way and leading screws are both lubricated periodically.
3) The spindle supporter is adopted with pre-loading accurate and angular contact bearings (assembly by bearing works), and with double cylindrical roll bearing. It can be acquired to optimized compound with high precision, high rigidity, high load bearing ability and high turning speed.
4) The machine tool has been fitted hydraulic tank, it is adopted Φ160mm hydraulic chuck with though hole (It is adopted hydraulic-clamping collets chuck device too). It can be fitted feeding support device in the form of weigh or hydraulic support device of automatic feeding too, and so it adopts process automation. The machine tool is protected entirely closed, compact construction, with small area.
1) CK6145A type CNC controlled lathe is used to turning inner and outer cylindrical surface, end surface, taper surface, arc surface and thread of shaft etc., with highly efficient and precision working. The tools can be fitted 8-12 position motor turret head type (or fix hydraulic turret head type by customers election), it also is adopted gang-type tool apron, turning tools can be fitted 6-8. The CNC control is adopted with GUANGZHOU CNC 980TA/TD system or KND-100T system and be fitted with different CNC system according to customer's requests. The spindle drive speed is adjusted by alterantion and frequency conversion, it realized permanent speed turning.
2) The lathe adopts 30ºinclined bed, with high rigidity, easy removal of chips, and convenient for observation. X and Z axes guide ways are adopted HTPM oversize with pre-loading lineal and rolling guide-ways. X and Z axes leading screws are adopted bigger diameter with 2 gradation accuracy ball leading screws, the accuracy of leading screws is most high grade in domestic by made in HANJINAG screw & guide works. The screw is in center type (it is fitted in center of bed), torque was eliminated, transmissive stability was raised. The lathe is adopted whole modular cast, it is treated aging, so that cast is not deformation. The lathe is adopted wider bed, with this result supporting rigidity increase, and raise turning stability. Therefore the lathe can be strong turning. The leading screw of bed was protect with straight plate (non-folding protective shield), as a result protection water and protection of chips was raised. The machine tool guide way and leading screws are both lubricated periodically.
3) The spindle supporter is adopted with pre-loading accurate and angular contact bearings (assembly by bearing works), and with double cylindrical roll bearing. It can be acquired to optimized compound with high precision, high rigidity, high load bearing ability and high turning speed.
4) The machine tool has been fitted hydraulic tank, it is adopted Φ160mm hydraulic chuck with though hole (It is adopted hydraulic-clamping collets chuck device too). It can be fitted feeding support device in the form of weigh or hydraulic support device of automatic feeding too, and so it adopts process automation. The machine tool is protected entirely closed, compact construction, with small area.
.jpg)
.jpg)
.jpg)
.jpg)
