DIN-53516 Rubber Testing Equipment Rubber DIN Abrasion Tester
Uses:
This machine determines the performance of abrasion wear for tires, conveyor drive belts, and shoe soles and so on.
DIN Abrasion Tester is applicable to flexible materials, c and so on. There is adequate test area, operation and sampling are simple. It should be used together with a balance. It mainly consists of power system, rotary roller, sample clamping device, automatic stop system and rack and small driving gear for driving the sample, seat and dust collector.
The major working principle is that under some specific load and on sand cloth of a specific grade, the column-shaped sample is placed on the sand cloth for abrasion for a specific journey. In this way, the mass of the abrasion from the sample can be measured by using the balance. With this and the density of the sample, the abrasion volume can be calculated.
Design Standards: DIN-53516,ISO-4649,GB/T9867
Specifications:
|
Specimen |
φ16mm,6~15mm(D) |
|
Fixture load |
2.5N |
|
Roll diameter |
150mm |
|
Fixture lateral displacement |
4.2 mm/hoop each lap |
|
Rooling speed |
40rpm |
|
Abrasion speed |
0.32m/sec |
|
Volume |
95*66*31cm |
|
Weight |
50kg |
|
Power |
220V 50HZ |
Features:
1. Accurate setting of the abrasion stroke by Delta digital counter;
2. Very easy to operate the moving system, even by one finger;
3. Keep safety system without crashing by electric sensor;
4. Use shield to protect the screw pole clean and lubricated rotating;
5. Very simple transformation between static test and rotary test.
