Environmental standard gypsum plaster board equipment
Our gypsum plaster board equipment applies international up-to-date equipments, such as full automatic batching system, plate type forming system, auto edge-adjusting, fixed length cutting, turnover transverse conveyor, transverse dryer, prevent folding device, automatic tracking mechanism, humidity and temperature auto-control device, fully automatic wrapping and booking device, auto packing system and so on. The batching system achieved fool-operation of 20 kinds of powder and slurry, and our production line can adjust metering and adding of each main and auxiliary material automatically according to the forming speed.
Machine introduction:
The capacity | · 2 to 30 million sq.m per year |
Type | · Hot air · Heat conduction oil type |
Degree of automation | · Full-automatic · Semi-automatic |
Fuel for the automatic gypsum board machine | · Natural gas · Coal · Diesel · Heavy oil · Light oil etc |
Raw materials | · Gypsum powder · Modified starch · Foaming agent · Fiberglass · Faced paper · Electricity · Water · White emulsion |
Gypsum board product specification | · Thickness: 7 to 15mm · Width: 1200, 1220mm · Length: 2000-3600mm · Type:Common,waterproof ,fireproof ,damp-proof · Quality of final products, being conformity with GB/T9775-1999 |
Material balance calculation per sq.m | · Gypsum powder:6kg · Modified starch:30g · Foaming agent:10g · Faced paper:380g · Water:4.2kg · White emulsion:5g · Power consumption:0.157kwh |
Detail show:
1.Paper supply system
l The special pneumatic shaft
l Magnetic powder brake
l Exact paper connection device
l High definition automatic device
l High definition automatic alignment device
2.Mixing system
l Mainly consists of paper slurry,foaming agent,starch,water and additive etc
l All slurry has the feedback signal of level indication and chain control each batching process according to the process requirement
3.Forming system
l This part is mainly the forming of wet gypsum board
l Can be adjusted manually
4.Conveying system
l This part is composed of two sets solidification belt machine and one conveying roller machine.
l The three machines need to run synchronically.
5.Cutting system
l Whole cut control algorithm is achieved by the separate PLC.
6.Transferring system
l This part mainly function is gypsum board acceleration conveying,overturning,transit conveying and lifting.
7.Dryer system
l Low heat consumption, heat preservation is good
8. Finished products converying system
l This part mainly includes fast outlet,sizing and stacking which are all equipped double.
9.Fast outlet system
l Can achieve the equipment failure without stopping.
10.Sizing system
l This part consists of transverse machine,storage roller,board colse folder and sizing device.
11.Stacking system
l This part consists of two sealing machines,stackers.
12.Control center system
l Host part adopts RS VIEW as the monitoring software table to monitor the whole production process.
l The general monitoring system displays the production process in front of operators and managers.
Maybe you have the same questions as follows:
1.Why price is high?
A:Where do you think high?Which product make you feel ours is high?In the current market,there is no cheap one than us during the same level.If you want to say small workshop,indeed,their machine is cheaper,but not on the same level.
2.How much is your cost?
A:Do you have a well known about our product?If not,you can not judge fairly about our machines whether cheap or expensive.You care about price because you want have profit.Know more about our product and marketing strategies,or take a visit of our factory,you will know well about price.
3.Why your price is cheap?
A:That is our selling points and product strategies.First,we buy a large number of material,and reduce the cost.Second,we have good faith management,no bad assests,the mnagement can be maximized efficiency.And last,Our management idea is a cost-effective way,low profits,low price.If you have sincere buying our machine,we can discuss price.
4.Do you have quality assurance?
A:Definitely,we have.If we can not assure the quality,can I sell to you?I seek to a long business cooperation,not only once.
We have passed ISO9001.
Our service:
(1)Turnkey solution inquiry
(2)One year for free maintainence
(3)One year for free for replacing machine parts
(4)Workshop layout design
5.What should do if happens quality problem?
A:No one wants problems.The reason caused by delivery,we will analyse at once,if our problems,we take responsibility,pls don't worry,we will follow by the contract,solve problems immediately and provide good service to you.
This is Rubin Industry and hope we can work together for better future!
Any questions about gypsum plaster board equipment,pls contact us.
Contact person-myra
Mob No------+8613832120199
Skype-------myra.qin
.jpg)
