Natural Colored Etched PTFE Roll With Sodium Treatment , PTFE Sheet
Quick Detail:
1.one side etched or two sides etched can stick on the pumps,tanks and steel sheet
2.Size can be made based on customers' detailed requirement
Description:
Etched PTFE Teflon sheet can be done to any shape or size, most preferred or most commonly used is
one side etching Sheet.Etched surfaces will discolor to a grown appearance.
It is also called PTFE Etching Sheet. It is an amazing non-stick material, but what about when you need
to glue it to the surface of another material ? In order to bond standard PTFE to another surface such
as stainless steel, a process called "etching" is required. Typical applications would include the lining
of chemical process tanks or other equipment used in caustic environments. When bonding is needed,
sodium ammonia etching is usually the most economical answer. This process uses of a mixture
of sodium and ammonia that is formulated to create a bondable surface both quickly and efficiently.
From microchips to full size rolls, fluoropolymers of any shape or complexity, including tape, sheet,
tubing, molded shapes & machined parts of any configuration can be etched & bonded. This treatment
can be accomplished on one or more surfaces, or selectively within close tolerances.
Applications:
1.Seals and gaskets
2. Valve and fitting components
3. Pump parts
4. Manifolds
5. Semiconductor equipment
6. Scientific equipment
7. Medical equipment
8. Chemical resistant tubing
9. Capacitor dielectric
10.wire isolation
11.electrical instrument isolation
Specifications:
Project Name |
Unit |
Result |
Apparent Density |
g/cm3 |
2.1 ~ 2.3 |
Tensile Strength |
Mpa |
≥ 14.0 |
Ultimate Elongation |
% |
≥ 150 |
Thick( mm ) |
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 15, 16, |
|
18, 19, 20, 22, 24, 25, 26, 28, 30, 35, 40, 50 |
||
Width ( mm ) |
100mm, 300mm, 1000mm, 1220m |