Flat Type Plug Terminal Automatic Crimping Machine for Cable Wire 1800~2000pcs/hour
Patent No : ZL2013 2 0064066.8 (This product has been patented, and copying is prohibited )
Applicable Cable : RVV/2C
Desciption : The automatic crimping machine adopted SMC original pneumatic component, three function of wire stripping, automatic feed and pressure connection in one, completed once for all. so the operator without working experence can operating easily. 3 ~ 4 labors are saved compared with original operating mode, reducing labor and improving out put.
Specification&Parameter:
|
Model of machine |
SD-1800 |
|
Pressure connection speed |
1,800~2,000pcs/hour |
|
Punching Force |
3T |
|
Holding force on plug range |
80-250N |
|
Stripping length of outer jacket |
As per customer’s requirements can be adjusted |
|
Stripping length of conductor jacket |
As per customer’s requirements can be adjusted |
|
Voltage |
AC220V/50Hz |
|
Pressure of air source |
0.5~0.8Mpa |
|
Weight |
375kg |
|
Dimension |
1,150mm*700mm*1,480mm |
How to use the automatic crimping machine?
- Add oil fule and lubrication oil to ach part whitch need
- Whether the upper and lower mold screw (the crimping parts of the upper and lower mold ) is fully locked or not
- Whether pressure reaches 4.5 kg
- Terminal placement : the terminal put into the vibration plate, can be put around 1000 terminals one time; putting wire into the " 24 " left back position, wire into the " 22 " , the wire transferring from left to right being sent in the right direction with the terminal riveting synchronously
-
Whether the punching press, vibration plate switch is turned on or not
