Automatic Cee & Zee Purlin Metal Roll Forming Machine with Gear Box Transmission
Automatic Cee-Zee purlin changeable machine components
This whole line is consisted of de-coiler (mainly consists of un-coiler and its base), gearing rigging, roll stand and main machine, pressuring system, cutting equipment, hydraulic system, control system, and product supporter, PLC control system, etc.
Specifications of Cee & Zee purlin metal roll forming machine
|
Cee_Zee Purlin roll forming Machine Specification |
|
|
Suitable raw material |
Q235A galvanized steel sheet |
| Flattening equipment Roller stations | 6 Stations |
|
Punching machine with moulds Capacity |
40T |
|
Line structure |
Portal-type frame style: A3 steel |
|
Forming Roller Stations: |
20 Stations |
|
Forming Roller Shaft: |
φ58mm, 40Cr, quenching, treating |
|
Forming Rollers: |
GCr15, quenching, hardness HRC50-58º |
|
Forming Speed: |
12 m / min (suggestion speed: 7-8m/min) |
|
Main motor: |
30KW |
|
Hydraulic station motor |
5.5KW |
|
feed material thickness: |
(1-3) mm× L |
|
Driving mode: |
Chain driven and gear box transmission is available |
|
Auxiliary rollers station |
5-11 stations |
|
Material of Roller: |
40Cr |
|
Cutting mode: |
Automatic punching cutting style , holes Punching Before roll-formed |
|
Blade material: |
Cr12, quenching and treating |
|
Cutting length Tolerance |
3mm |
|
Control mode |
PLC |
|
Line speed |
Adjusted by Frequency Inverter |
|
Voltage: |
380V/3ph/50Hz or according to the buyer's requirement |
|
Run-out table mode: |
Roller style |
|
Line dimension: |
14000mmx 1400mm x 1200mm |
Applications
PURLINS, both C and Z, are available in various sizes rolled to any length. They can be ordered plain or with holes pre-punched, as per standard end punching shown below, or punched to
