Customized LCD Capacitive Touchscreen SIS 9257 Chip on Board , Glass Touch Panel
Quick Detail:
- Cover Glass+OCA+ITO Glass+FPC+Adhesive
- Cover Glass: 1.1mm
- ITO Glass: 0.7mm
- Sensor Process: Printing
- Light Transmittance: ≥87
- Surface Hardness: 7H
Specification:
|
Model No. |
SCT-GA2-004878A |
|
Size |
12 inch |
|
Active Area |
246 x 184.5mm |
|
Outline Dimension |
290 x 220.5mm |
|
Structure |
Cover Glass + Sensor Glass |
|
Cover Glass |
1.1mm |
|
Sensor Glass |
0.7mm |
|
Total Thickness |
2.2±0.1mm |
|
FPC |
Pitch=0.5mm |
|
Surface Hardness |
7H |
|
Connection |
COB(Chip On Board) |
|
IC Model |
SIS 9257 + F321 |
|
Transmittance |
≥87% |
|
Operating temperature |
-2070, ≤90%RH |
|
Storage temperature |
-3080, ≤90%RH |
Assembly Precautions:
- Do not exert extra force to touch panel.
- Since touch panel is transparent and clear,make sure to wear fingerstall or glove before touching.Be careful of your hands and other parts from injury at handling by glass corners.
- When handling,make sure to hold the touch panel borders not center parts to avoid dirt to touch panel. Do not lift touch panel by tail to avoid tail loosen.
- When installing and assembling, do not lift tail with heavy force to avoid tail peeling off touch panel.
- Do not stick or mount other parts on the tail, such as additional film or metal plate. As it will exert extra force to tail tip and cause tail loosen.
- Please don't pull FPC with force from side to side, because the FPC tension will make FPC burst.
- If there is air groove on touch panel, when design product structure, make sure no liquid and powder near the air groove.
- In order to avoid heavy stress to touch panel surface, make sure to keep 0.2mm-0.5mm assembling gap between touch panel and case.
About Us
Main Structure:
GG structure
GG structure uses cover glass plus sensor glass solution, harder than PG structure, high transmittance and good effect for anti-scratch.
PG structure
PG structure uses one PET film plus sensor glass solution. Mature process&n
