Crossover

INPUT CONNECTORS             : XLR
TYPE                                     : ELECTRONICALLY BALANCED/UNBALAN, RF FIL TERED
IMPEDANCE                          : BALANCED >50KOhm, UNBALANCED >25KOhm
MAX INPUT LEVEL                 : >+22dBu TYPICAL, BALANCED OR UNBALANCED
CMRR                                    : >40dB, TYPICALLY >55dB AT 1KHz
OUTPUT CONNECTORS         : XLR
TYPE                                     : IMPEDANCED BALANCED/UNBALANCED, RF FILTERED
IMPEDANCE                          : BALANCED 200Ohm, UNBALANCED 100Ohm
MAX OUTPUT LEVEL              : >+21dBu BALANCED/UNBALANCED INTO 2KOhm OR GREATER
PERFORMANCE
BANDWIDTH                          : 20Hz TO 20KHz, +0/-0.5dB
FREQUENCY RESPONSE      : <3Hz TO >90KHZ, +0/-3dB
SIGNAL TO NOISE                 : REF +4dBu, 22KHz MEASUREMENT BANDWIDTH
                                        STEREO MODE      MONO MODE   
      LOW OUTPUT                    >94dB                    >94dB
      LOW-MID OUTPUT                                           >94dB
      MID OUTPUT                      >93dB
      HIGH-MID OUTPUT                                          >92dB
      HIGH OUTPUT                    >90dB                    >88dB
DYNAMIC RANGE                    : >106dB, UNWEIGHTED, ANY OUTPUT
THD+NOISE                             : <0.004% AT +4dBu, 1KHz
                                               : <0.04% AT +20dBu, 1KHz
INTERCHANNAL CROSSTALK  : <-80dB, 20Hz TO 20KHz
CROSSOVER FREQUENCIES
STEREO MODE LOW/HIGH     : 45Hz TO 960Hz OR 450Hz TO 9.6KHz (×10 SETTING)
            LOW/MID                    : 45Hz TO 960Hz OR 450Hz TO 9.6KHz (×10 SETTING)
            MID/HIGH                    : 450Hz TO 9.6KHz
MONO MODE LOW/LOW-MID  : 45Hz TO 960Hz OR 450Hz TO 9.6KHz (×10 SETTING)
          LOW-MID/HIGH-MID       : 450Hz TO 9.6KHz
          HIGH-MID/HIGH              : 450Hz TO 9.6KHz
FILTER TYPE                           : LINKWITZ-RILEY, 24dB/OCTAVE, STATE-VARILABLE
FUNCTION SWITCH
FRONT PANEL  LOW CUT        : ACTIVATES 40Hz BUTTERWORTH, 12dB/OCTAVE HIGH-PASS
                                               FILTER, ONE SWITCH PER CHANNEL
             PHASE INVERT           : INVERTS THE PHASE AT THE OUTPUT, ONE
                                                SWITCH PER OUTPUT
REAR PANEL  ×10                  : MULTIPLIES CROSSOVER FREQUENCY RANGE BY 10,
                                               ONE SWITCH PER CHANNEL
            MODE                          : SELECTS STEREO/MONO AND 2/3/4 WAY OPERATION
            LF SUM                        : SELECTS NORMAL (STERO) OR MONO-SUMMED LOW
                                                FREQUENCY OPERATION
INDICATORS
STEREO OPERATION             : GREEN LED
MONO OPERATION                : YELLOW LED
LOW CUT                               : RED LED PER CHANNEL
×10                                       : GREEN LED PER CHANNEL
PHASE INVERT                      : RED LED PER OUTPUT (3 PER CHANNEL)
POWER SUPPLY
OPERATING VOLTAGE           : 110~120/60Hz or 200~240/50Hz VAC Selectable
POWER CONSUMPTION         : 15 WATIS
MAINS CONNECTION              : IEC 320 RECEPTACLE
PHYSICAL
DIMENSIONS (W×H×D)         : 482×44.5×146 mm
NORMAL WEIGHT                   : 2.5Kg
SHIPPING WEIGHT                  :3.0Kg