Noopsyche Single Wheel Segway Balance Unicycle One Wheel Electric Scooter Zero Emissions
Parameter:
| Battery | Samsung Lithium battery 60V, 2200MH |
| Power | 350W |
| Battery Volume | 132WH |
| Max. Speed | 18km/h |
| Max. Load | 120kgs |
| Max. Mileage | 15~18KM depend on driving |
| Max climbing | 35 degrees or less |
| Tire | 14′′ x 2.125" (356 mm) |
| Battery lifetime | Over 1000 cycles |
| N.W | 9.80kgs |
| Scooter size | 450mm long 395mm thick 160mm high |
| Charger | AC220V 50-60HZ |
| Charging time | 1 hour only |
| Color | Black, white, pink, green, gold |
| Suitable Temperature | 10-50 degree under Zero |
Driving Guide
1. If you try to drive the Single Wheel Electric Scooter With Pedals find an open place or yard. It's better to have someone around to help with your balance when you start learning to drive.
2. Place the electric scooter vertically on the ground and turn on power. Power and Battery Level LED will light up and buzzer will beep. If the scooter slopes forward or backwards with the power on, please wait until it automatically reverts to upright position before riding.
3. A four-bar LED indicator is used to indicate battery level. All indicators will light up when power level is more than 85% and will go off one by one as the level decreases. Please check power level before driving to make sure there is enough power for the return trip. Suggest that the scooter be charged after every use to avoid any inconvenience. When power level is lower than 10%, the four indicators flicker and the buzzer keeps beeping. The front part of the foot pedals will slope down to force you to decelerate and eventually stop. Please do not restart the scooter when this occurs to avoid any accidents.
4. Sustained range will decrease during winter. This is because the battery performance decreases quickly in cold conditions. At -15, for example, battery performance will lose one half of its capability than at the normal temperature.
5. To prevent injuries caused by speed, Single Wheel Electric Scooter With Pedalscomes with a speed control function. When speed exceeds 10km/h, the front part of the foot pedal will slope up slowly. When the speed exceeds 18km/h, the power indicator flickers and buzzer beeps, the foot pedal will slope up to a 10° angle, this is to prevent you from inclining forward for further acceleration. As the speed decreases, the foot padels will come back to its horizontal balance.
NOTES:
When the speed is about to reach its limit, please do not incline forward anymore to force acceleration to prevent injuries.
Do not steep the scooter in water or take long rides in heavy rain.
