Lower Cost...But Have Big Function...
Automatic Suction Brush Filter
Description:
Functions and applications:
The automatic sewage-sucking brush filter is widely used in all water systems,especially the continuous working water system.it could remove teh descalings and all mechanical impurities to reach the purpose of descaling and algae killing and ensure the safe and reliable working, which is the ideal replacement of imported ones.all indexes full reach or exceed equivalent imported ones.
Structure and principle:
Automatic sewage-sucking brush filter is composed by 304 stainless steel brush , stainless steel strainer cleaning devices and other main structure parts, both cleaning and sewage discharging will be finished by the drive motor and the electric valve automatically,the operation mode could be automatically (or manual),it could be time-setted or pressure-difference discharging.
When water flows through the filter ,mechanical impurities will be intercepted by filtering screen ,when the impurity accumulated on screensurface area increases and the pressure difference reached 0.06MPa,pressure difference switch will send a signal,the driving motor start and blow-down valve opens, the impurities deposited on the filter will be brushed down then sucked out from sewage-sucking outlet then discharged from outlet,during the whole brushing and sewage-discharging process without any pause stopping.meanwhile,this filter could be time-setted cleaning and blow-down also with manual cleaning draining ,which ensure the water is safe all the time.
Specifications:
|
Model |
Pipe dimension(mm) |
Flow rate |
Outfall dimension (mm) |
Min water pressure(MPa) |
Max water pressure(MPa) |
|
YLXS-150S |
150 |
150 |
DN50 |
0.25 |
1.0 |
|
YLXS-200S |
200 |
300 |
DN80 |
0.25 |
1.0 |
|
YLXS-250S |
250 |
400 |
DN80 |
0.25 |
1.0 |
|
YLXS-350S |
350 |
1000 |
DN80 |
0.25 |
1.0 |
Function
Automatic brush filter the original water filtration and automatic filter cleaning discharge function, and cleaning sewage system uninterrupted water supply. Automatic brush filter cleaning has two control modes: automatic control and manual control.
Automatic control: Automatic control timing and pressure difference .In the filtering time timer is set on the filtration time, when the filtering time, start the sewage, discharge time from emission time timer setting. At the same time control system real time system and the pressure difference of the user set pressure difference comparison, when the system pressure reaches the set pressure. Also for cleaning sewage filter, Pollution by sewage time timer. Discharge time, stop washing, the system is restored to its initial state,For the next process to prepare.
Manual control: Make the operation panel on the automatic / manual selection switch to manual position, filter for sewage.
The user can choose according to the two control modes by specific operations, see behind the operation part.
FAQ:
01. What is the capacity (m3/hour)you required for this equipment?
02. What is the material for this filter?
Carbon steel ?or stainless steel (SS304/SS316)?
03. What is the filtration degree?
100 micron or 1000 micron?
04. What is the power supply?
220V/50Hz or other?
