Descriptions:
Process: Injection Molded Size Range: dn50 to dn630
SDR avialable:SDR17/SDR11 Material:100% virgin PE100 (PE80 on request) Sabic/Borouge/Sinopec
Dimensions:
Note: 1, All dimensions are subjected to be changed without notice. For enginnering use,please contact with us for details.
2, Other sizes are available on request.
.
Main Characteristics
BESFUSION molded butt fusion fittings are produced from 100% virgin Polyethylene material of PE100,produced by Sabic, Borouge and Sinopec, the leading Polyethylene manufacturers in the world. All BES butt fusion fittings are compatible for heat fusion with any pipe or fittings manufactured from a like or similar resin.
Butt fusion fittings produced by BESFUSION have been approved to be in compliance with ISO4427 and BS EN 12201 standards, with the main properties as below
Material Properties | Unit | Test Method | Value |
Density PE100 | g/cm³ | ISO 1183-2 | 0.957～0.963 |
Density PE80 | g/cm³ | ISO 1183-2 | 0.93～0.95 |
OIT | min | ISO11357-6 | ＞20 |
MFR | g/10ming | ISO 1133:2005, Condition T | 0.25～0.44 |
Butt Fusion Fittings Properties | Test Method | Performance |
Hydrostatic Strength at 20℃ 100hs | ISO1167-1 ISO 1167-3 | No failure |
Hydrostatic Strength at 80℃ 65hs | ISO1167-1 ISO 1167-3 | No failure |
Hydrostatic Strength at 80℃ 1000hs | ISO1167-1 ISO 1167-3 | No failure |
Tensile strength | ISO 13953 | Ductile Failure |
OIT | ISO11357-6 | ≥20minutes |
MFR Change | ISO1133:2005, Condition T | Within 20% |
