Supermicro thermal power equipment Kinetic steam mill
Operating principle:
Kinetic steam mill take superheated steam as media, through the annular supersonic nozzle to accelerate to a high speed air stream to help accelerate speed of material, and materials collide with each other to realize crushing. Crushed material will be classified through the turbine air. Qualified powder collected by former collector, and unqualified powder will return to grinding chamber to crushing again. Stem keeps in overheat state, and producing under full dry method in the whole system
Features:
1. For the low energy consumption, it can take full advantage of back-pressure steam or steam over low heat shrink existing generation after generation as power, and it can effectively reduce the cost of powder processing. And the steam is not available on the practical application of emptying, but if take Kinetic steam mill, the processing costs will only count 1 / 5 to 1 / 8 compared with jet mill.
2. It has high crush strength, and can get a finer powder. This equipment even can realize Submicron even nano-powder processing to some material. Generally speaking, conventional jet mill design linear velocity is 400m / s to 600m / s, while the Kinetic steam mill can up to 1000m / s.
3. Kinetic steam mill,that is the material to collide with the material to crushing, so the equipment will not wear hardly. If large foreign body (bolts, iron, etc.) mixed with material go into the equipment, it will not damage the equipment. This equipment need low maintenance, has very few wearing parts, and will cost little for maintenance.
4. In the process of making explosive powder such as pulverized and petroleum coke, it can make sure the safety during process, and the material is crushed in the whole superheated steam, so there is no danger of explosion. and the powder can be kept at 40℃ to 80℃, this will help improve the combustion rate.
5. A wide range of particle size and processing, according to the requirement, it can make powder within 100 mesh -12500 mesh
6. Making full use of low-grade superheated steam power plant as power, low-cost, large-scale ultra-fine powder processing.
Technical parameters
model | Steam consumption | maximum feed size | discharging size(adjustable) | Production capacity |
JSDLGS-200 | 200kg/h | ≤3mm | 1-74um | 50-200kg/h |
JSDLGS-1000 | 1000kg/h | ≤5mm | 1-74um | 100-1000kg/h |
JSDLGS-2000 | 2000kg/h | ≤5mm | 1-74um | 500-4000kg/h |
JSDLGS-3000 | 3000kg/h | ≤5mm | 1-74um | 1T-7T/h |
JSDLGS-6000 | 6000kg/h | ≤5mm | 1-74um | 2T-10T/h |
JSDLGS-10T | 10Tkg/h | ≤5mm | 1-74um | 5T-20T/h |
Flowsheet:
Patent and certificate:
Factory picture:
support :
We can not only provide the good machines, but also wholeheartedly provide the comprehensive for our clients. The series of professional technology service will make you have an excellent product experience.
After-sales service support
After we signed the purchase contract and have a certain reputation guarantee, we will contact the professional group that responsible for ship bookings, commodity inspection, commercial invoices, packing list, insurance policy and so on, in order to provide you the perfect goods trading services, until the product you purchased properly to your hands.
We will send a professional and high levels installation engineer team at the same time the product properly to the destination, in order to supply you a full range of products installation services. For some typical problems, our rigorous installed engineers also will do some certain installation debugging training, etc.
Technological support
JSDL has been largely adopting new technologies, new techniques and high-tech equipments. And JSDL also has strict and effective quality control system.
JSDL insists on providing clients with overall solutions from equipment recommendation to debugging and installation, worker training, technical support and maintenance.
contact information:
contact person: catherine
tele/fax: 0086-28-61318297
skype: dandelionzoe
