POE RJ45 Connector Integrated Magnetics 8P8C With Shield And LED Transformers
Specifications
|
Series |
Connectors, Interconnects |
| Connector Type |
RJ45 Female Jack |
|
Mounting Type |
Thru-Hole |
|
Orientation |
10P8C Side Enter |
|
Termination |
Solder |
|
LED Color |
G/ Y |
|
Shielding |
Shielded |
Electrical Requirement:
1. RATING VOLTAGE: 150V AC MAX.
2. RATING CURRENT: 1 AMPHERES MAX.
3. CONTACT RESISTANCE: [30] MILLIOHMS MAX. (INITIAL), [50] MILLIOHMS MAX. (FINAL).
4. DIELECTRIC WITHSTANDING VOLTAGE: NO CREEPING DISCHARGE OR FLASHOVER SHALL OCCU R.
5. CURRENT LEAKAGE: 1MA MAX. [500]VAC FOR 1MINUTE.
6. TEST BETWEEN ADJACENT CIRCUITS OF UNMATED CONNECTOR
MECHNICAL:
1. HOUSING MATERIAL:GLASS FILLED POLYESTER(UL94V-0).
2. CONTACT MATERIAL:PHOSPHOR BRONZE T=0.46MM (C5 100).
3. PLATING:GLOD PLATING OVER NICKEL.
4. DURRABILITY:750 CYCLES MIN.
5. PCB RETENTION PRE-SOLDER:1 LB MIN.
6. PCB RETENTION POST-SOLDER:10 LB MIN.
ENVIRONMENTAL:
1. STORAGE:-40 TO +85.
2. OPERATION:0 TO 70
3. WAVE SOLDER TEMPERTURE:230-250(5-10 seconds)
MATES WITH MODULAR PLUG CONFORMING TO FCC PART F.
Drawing
POE RJ45 Connector Integrated Magnetics 8P8C With Shield And LED Transformers
( PHC )
Why Choose PengHui
Quality :
Except the plating , From Design tooling , stamping , Injection molding , assemble , Testing , packing .All the step are doing by ourself . So we can control the quality .
|
Manufactured under strict controls |
RoHS compliance |
|
ISO 9001:2008 |
OEM for PULSE |
|
UL Certification |
Active Environmental policy |
|
Reach Cetitifaction |
Every module tested 3times (not just batch tested) |
Unit Price
Charge only 35% ~ 60% of Pulse , Wurth(Midcom), Bothhand Belfuse, Tyco, Halo,....Etc
1. All the step are doing by ourself. So we can control the cost
2. PHC have more than 30 units automation equipments to product as possible
3. PHC consists of 3 subordinations , located partly in Hunan ,Hubei ,Guangdong .
4. With large scale of production lines, we can reach to cost reduction at the most extent
Production&Testing
PHC have more than 30 units automation equipments to product as possible
PHC Every Magnetic RJ45 tested 3times (not just batch tested)
PHC Every SMT part used Automation testing and packing.
Service
PHC Offer good pre-sales & after-sales service &Strong technical support
1. New Project: Strong technical and ideal support your new design
2. Existing projects: Try to help customer to save the cost to offer the good quality product and save time.
3. Free Samples:3-5 PCS of each part number.
4. Shipping Fee :We can get 80% off from DHL/UPS/TNT/FedEx, keeping safe and fast.
5. Customer complaint:24-48 hours reply 8D report.
6. Warranty : 24 months ( Merchandise are promised to be promptly returned, replacement,or repair kits if
customers are not satisfied)
Design &Technical strength
We have many more than 20years experience in connector industry engineer can support your new
project.Design a new tooling time : 30-45 workdays
Quality Department Organization Chart
Hardware Mold Equipment
Equipment
Wish To Be Your Best Supplier and Supporter In Your Lan connector Solutions
------------- PHC Sales & Support Team
