Industry 10 inch Polypropylene 50 Micron Filter Cartridge for Filtration Equipment
- General Description:
The DLM series PP pleated filter cartridge deliver high efficiency and consistent filtration of fluids in a wide
range of critical applications. They are constructed of pleated melt blown filter media that provides removal of
particles from 0.1 to 50um. The high surface area ensures long life and low initial pressure drops. All cartridge
hardware components are made from high purity polypropylene material for use in critical process
applications. These cartridges are manufactured and assembled in a clean room environment to minimize
the possibility of contamination. M-Series filter cartridges are available in a wide range of configurations to
fit most commercially available filter housings.
- Specifications:
|
Outside Diameter |
2.7''(69mm) |
|
Length |
9.75'',10'',20'',30'',40'' |
|
Filter media |
PP |
|
Support Layer/Cage/Core/ End caps |
Polypropylene (PP) |
|
Seal Material |
Silicone,EPDM,NBR,Vilton,Teflon,E-FKM |
|
Removal Rating |
0.1um,0.22um,0.45um,1um,3um,5um,10um,20um,50um, |
|
Maximum Operating Temperature |
80°C |
|
Maximum Differential Pressure |
4.0Bar@25°C |
|
Maximum Differential Pressure(Reverse Direction) |
2.0Bar,25°C |
|
Maximum temperature sterilization |
5times, 20minutes cycles at 120°C |
- Features:
-- Excellent performance of chemical compatibility
-- Hydrophillc membrane with high flow
-- Non-fiber releasing according to pharmaceutics and food industry requirements
-- Experiencing 100% integrity tested
-- Flushed with ultrapure water
-- FDA compliance material
- Applications:
Pharmaceutics
Food and beverage
Oil & Gas
Microelectronics
Chemical industry
Prefiltration for RO
Semiconductor
Paints & coating
Cosmetics
Photographic solution
Plating solution
