Leaving your PSTN/GSM Alarm behind!!!----
Newest Cloud IP Alarm is coming!!!
Benefits of Alarm over IP :
Alarm over IP systems were designed to overcome many of the operational shortcomings of telephone-based alarm systems. Today's Alarm over IP systems offer several important benefits to both end-users and installers.
Higher speed Telephone---based alarm communication typically experiences a delay of up to several minutes before an alarm signal can be relayed. This is because the system must make a telephone call, including dialing a number, waiting for an answer from the central station receiver and then relaying its message. In contrast, IP alarm communication is virtually instantaneous. Although a few minutes may not appear to be significant, it is noteworthy that sophisticated criminals can disable many alarm functions in only a few seconds. From this perspective, every second of operational efficiency counts. The higher speed of IP is also very appealing for remote maintenance and programming of the alarm panel.
More convenience--- An IP communicator does not interrupt the phone line. This is especially important in an emergency situation where the end user is trying to use the phone to contact authorities. It is also important for small businesses that share their business phone with their alarm system. Interrupting a phone call can mean upset customers and potentially lost business.
Lower cost--- For those end users who previously used a separate phone line for their alarm system, IP can be used to convert dialer based panels to IP as the primary communication path – eliminating the monthly phone line costs
Customer retention--- A customer who eliminates or switches their standard telephone to VOIP (Voice over Internet Protocol), then suddenly loses the operation of their alarm system will be upset. IP communication allows the installer to retain this customer and solve their problem quickly.
Higher security--- In telephone communicators, connections are tested to ensure proper system operation. However, the frequency of testing can be less than adequate, with several days between tests. Criminals can easily exploit this deficiency, plotting their crimes in between tests when they can sabotage the system. IP alarm communicators are supervised more frequently than standard telephone communicators. If the connection is lost, the central station knows almost immediately. The data transmitted is also authenticated and can be encrypted to prevent intercept attacks. Because PSTN based communications are not authenticated or encrypted, they are susceptible to being disabled by recording and replaying signals, or substituting the alarm panel with a fake.
Now,,Let's view our unique cloud based ip alarm detail informations......
App
| The App is the Users Multi-Control and Alarm interface for the Alarm System. All settings can be adjusted from here.
Change alarm mode Armed Disarmed Homemode
Add new sensors Delete sensors Change sensor name Setup Alarm receives via Push Setup alarm receivers via email See system warnings Receive Burglar Alarm from system. Setup exit entry delay Siren function etc...
|
Quick installation
| The setup of the system is easy. Only a few steps are required and the system will be ready for use. - Connect the Alarm Base Unit to the internet and connect power. - Download and install the app. - Open the app and follow the instructions. - Mount the sensors by the screws or use the adhesive tape. (Included) - Included sensors are pre-learned to the system. All one have to do is to rename them according to the location. eg. kitchen, front door etc.
Estimated installation time: 10-30 mins.
|
Automated system health indicator
| The health indicator in the App always ensure the optimal condition of the system. If the system has failures like defect sensor battery, tamper , interruption of internet, alarm, etc. the indicator will change from green to yellow or even red by serious problems. The user can easy see if something need his attention. After correcting the failure, the Health indicator can be reset to green.
|
Worldwide mobile access
| The alarm system can be accessed by smart devices with the alarm App installed and mobile internet from all over the world without any further setup. E.g. iPhone, iPad, Android.
|
Push notification
| Users can install the app for IOS or Android and log in to a system. They all get a push message if something happends. - Burglary Alarm - Fire Alarm - Gas Alarm - Lost Power - Lost Internet - Internet re-etablished - Sensor battery low - Backup battery running low - etc. Users can log in to more systems and get messages from the neigbors system too.
|
Email notification
| Users can register email addresses in the App. They all get an email if something happens. - Burglary Alarm - Fire Alarm - Gas Alarm - Lost Power - Lost Internet - Internet reestablished - Sensor battery low - Backup battery running low - etc..
|
Instant Internet interruption check
| If the internet connection is interrupted, your smartphone APP will receive warning PUSH.
|
Instant Power interruption check
| If the power connection is interrupted, yoursmartphone APP will receive warning PUSH.
|
Family Home Check
| When the alarm system change mode, the system will notify all users.
Example: A family has 4 members. Mother, father, Jack(14 yrs) and Anna (11 yrs). Anna and Jack come home from school at 16.00. The Parents arrive later at 18.00. With 'Family Home Check' the parents can be at work and see who arrive the residence and they can see when the children leave the house.
|
In App Siren
| All users become their own private siren. Build in to the App in the smartphone the siren is always connected and right next to the person in his handbag or pocket. This is the best way to ensure the siren to heard by right person.
|
Multi language module
| The system is available in following languages: -Chinese -English -German -Dutch -Spanish -Norwegian -Swedish -Danish
New languages are easily integrated on the cloud server. As soon as the server has been updated, the language will be available in the App. No update of the app is necessary.
|
Event log
| The event log is visible in the App. Previous events can easily be studied by the user.
|
Please note that,all above operation,you could done directly via your smartphone APP,
Truly control by your phone APP.
Difference between Cloud IP Alarm and GSM Alarm
Cloud IP Alarm | GSM Alarm | |
Frequency | 868MHz | Mainly 315/433MHz |
Technology | 868 FSK Cloud Service | GSM phone technology |
Phone Card | No need. Internet cloud service | GSM card |
Cost | No cost | Pay for GSM card rent every month |
Operation | Phone/tablet APP control the whole system anywhere | Panel keyboard control the system |
Notification | Instant PUSH Notification on phone or sending Email | Sending SMS to phone |
Alarm Way | Phone APP blow and siren blow at the same time, can blow while having phone call | Dialing to the phone, can not blow while having phone call |
Signal | strong and fast, we spend millions dollars built 16 servers over the world | Weaker and slower, share server with others, don't have own server |
Antenna | No, but with strong signal via cloud server | Yes, signal unstable |
Rate of False Alarm | Low. | High. |
Tamper-proof | "Tamper Triggered" inform to your phone and blow on phone | No notification |
Learn accessories | 10 seconds. | Some minutes. |
Name the Zones | Name every accessories | Can Not. |
