1. Specifications:
Model No. | PCB-34001 |
External Size(mm) | 3400 (L)*1670 (W)*2880 (H) |
Inside Size(mm) | 2400 (L)*1150 (W)*1700 (H) |
| Exit/entrance size(mm) | 600(W)*1700(H) |
Structure | Packing down, easy to transport Exit/Entrance on the sides, could be used with suspended rail toghter |
Cabin System | - Made of galvanized steel, powder coated on the surface. - There is a cross bar on the top for hanging the work piece. |
Powder Recovery System | - Dust filter cartridge *4pcs, each size 600mm*Ø320mm |
- Solenoid valve*4pcs, the holeØ20mm,DC24V | |
Circulation System | - 1 set of centrifugal blower, motor 3KW, air flow 4000~6800 m3/h. - The blower connected with booth by anti-flaming soft tubes - The exhaust vent of the blower could be adjusted in four directions |
Blower Holder System | - Made by 40*40 square tubes - Independent from the booth to prevent the resonance and reduce the noise. |
Lighting System | - 1set of explosion proof light,2 Philips tubes, each 36w |
Control System | - 1 set, control the blower, pulse blowback and powder light. |
2. Advantages of powder coating booth
(1) The fan of recovery system is independent. The connection between the fan and recovery is anti-flame soft pipe to reduce noise and prevent resonance.
(2) The recovery system and booth shell is galvanized steel with light powder, easy to clean and has beautiful appearance.
(3) The booth cabin is packing down to transport, freight is lower.
(4) Individually sealed plug-in LED lamp on the ceiling of the booth, brightness is high, not easy to be dirty and accumulate powder (The lamp temperature is low.)
(5) Chinese/English digital pulse blowback controller
(6) The lifetime of the filter cartridge in the recovery system is more than 2 years
3. Shipping:
Can transport to any port from Qingdao port
