Room Folding Partition Walls , Sound Proof Doors , Metal Partition Frame Ceiling
Specifications :
|
Technical Parameter for Partition Panel |
Panel Width |
500 - 1230mm |
|
Panel height |
2000 - 6000mm |
|
|
Sound proof |
36 - 42db |
|
|
Operation |
Manual |
|
|
Frame |
Aluminum |
|
|
Vertical profile |
Anodised aluminum profiles with integrated magnetic strip and sealing edges on the inside |
|
|
Finish options |
Fabric, veneer, HPL melamine, vinyl, carpet, customers own material, Bare finish |
|
|
Base options |
Plywood, Gypsum, steel, MDF |
|
|
Max width |
Unlimited |
|
|
Panel weight |
28 - 40 kg / sq |
|
|
Pass door selection |
door |
Single or double door |
|
Seals |
Top |
Manual |
|
bottom |
Manual |
The Special Point Processing On Movable And Operable Partition System
(1).Horizontal seals
The principle of double skin construction on movable and operable partition system is applied consistently in the seal area in order to ensure maximum sound insulation . A spindle mechanism presses extendable, spring loaded, double seals against the fl oor and the ceiling track . Any irregularities in the fl ooring are offset by spring-loaded double chamber seals . The contact force of the sealing strips does not place excessive strain on screed fl oors , but does ensure that the Variflex system is sufficiently stable to prevent the panels moving , even in the event of an attempted forced entry .
(2).Corner seals
Variflex resolves the technical issue of corner seals with specially designed, corner pieces that also reinforce the stability and sound insulation properties of movable and operable partition system
(3)Magnetic strip
The individual panels are centred via the magnetic strips to guarantee sound positive locking and sealing.
Operation :
Partitions shall be top supported, manually operated panels stacked in an area nominated in the plans. When closed, the operable wall shall provide a complete sound retardant barrier. No floor track shall be used.
Track :
The tracks are made from extruded 6063 – T6 anodized aluminum . The track housing shall utilize grooves and interlocking steel pins for positive alignment of adjacent track sections , and shall be reinforced overhead by drop rod brackets . Aluminum track housing shall include an integral nut slot to accept a hardened square nut for attaching each drop rod bracket to the top of the track .
Trolley :
BUNGE Centre / Side / Remote stacking system with a Two wheeled nylon trolley made with the base Material of POM 45 tempered steel shall be used as per approved stacking method .
