Solar-powered wireless infrared alarm beam sensor with wireless alarm receiver is ideal sensor kit for outdoor garden, driveway, fence, wall break in alert alarm guarding signal transmission.
2.Working Temperature Range: -40℃-+70℃ 3.Wireless transmission distance can reach to 1km 4.Low false alarm rate 5.Long life time and less maintenance It is 100m infrared distance solar powered intrusion barrier used for school, workshops, perimeter fencing of residential quarters etc. 
It is more convenient for installation and maintenance. It is with features as below:
1.Can be used at rainy day and dark environment as well
The material of solar panel is Amorphous Silicon and can be charged by weakness light (UV rays). The static working current of this active beam is 0.5mA/h and 500mAh rechargeable battery inside enables it working for more than 15 days without any light. The solar panel can generate 2mA/h at rainy days and enable the detector working at rainy days and at dark environment.
This detector can work at extreme weather condition such as heavy snow, rainy days cause of industry grade components are used and it is fully sealed.
This detector is designed to anti interference and adopts FSK + FHSS signal transmission technology which enable long wireless transmission distance
It adopts pulse technology and makes it stronger penetrability. So it can against interference caused by heavy rain or fog etc.
It adopts second modulation technology to avoid all kinds of light interference from strong sunlight etc.
It adopts pulse analysis technology and only after 4 continuous pulses are received, the detector will make alarm. It will report the invalid information to alarm host such as low battery, not aiming, bracket is moved etc.
The detector has 8-10 years life time cause of IP66 waterproof and fully sealed design. And it adopts optical pulse technology to reduce the use time of the infrared luminosity.
It is lightning proof designed with fully-sealed case.
Functions and Specification:
1.It is a solar-powered wireless product and should be installed at place with sunlight intensity more than 2200lux.
2.It is triple beams wireless outdoor infrared detectors working by pairs of transmitter and receiver.
3.Irradiation distance:100m
4.Wireless transmitting distance:100m
5.Wireless frequency:433MHz
6.Maximum alarm times in 24 hours:<=50times
7.Infrared light beam number: 3 beams
8.Battery capacity: transmitting terminal: 500mAh, receiving terminal: 1000mAh
9.Working temperature: -30℃~70℃
10.Working voltage:3.3V
11.Power storage type: LiFePO4 Battery
12.Static working current: transmitting terminal<=0.5mA, receiving terminal<=0.5mA
13.Infrared light frequency: secondary modulation & encoding based on 38KHz
14.Infrared light wave-length: 940nm+/-20nm
15.Output current of solar panel: Under the condition of 1800Lux lighting >=2mA (Outdoor illumination in ordinary rainy or cloudy days is about 2000Lux)
16.Dimension:340*84*45mm
17.Distance between infrared light hole: 35mm
18.Updated with electric power recharging jack.
