Commercial seawater reverse osmosis system for seawater desalination 60000GPD 10m3/hour
1. Description:
For continuous or heavy-duty service in marine applications on and off shore, we manufacture a full line of designed seawater desalination systems.
Seawater Reverse Osmosis (SWRO) is a reverse osmosis desalination membrane process that has been commercially used since the early 1970s. The typical single pass SWRO system consists of the following components:
- Intake: well or open water
- Pre-treatment: Filtration and chemical dosing
- High-pressure pump: to achieve the needed pressure
- Membrane assembly: to perform the desalination process
- PH adjustment: to adjust the alkalinity or acid level
- Disinfection: to prevent any bacterial or organic growth
- Experience in manufacture and supply hundreds of seawater desalination plants with feed water TDS up to 45,000 ppm.
Technical data
| Model | Capacity | Operate pressure Mpa | Electricity | Dimension | Machine type | ||||
| GPD | L/HR | Pretreat | Membrane | Voltage | Motor (kw) | Power | LxWxD (cm) | ||
| SWRO-300 | 300 | 50 | 0.1-0.3 | 4-6.5 | 220/380 | 1.5 | 15Kwh/T | 58x44x160 | Vertical |
| SWRO-600 | 600 | 100 | 0.1-0.3 | 4-6.5 | 220/380 | 1.5 | 11Kwh/T | 58x44x160 | Vertical |
| SWRO-900 | 900 | 150 | 0.1-0.3 | 4-6.5 | 220/380 | 1.5 | 8Kwh/T | 58x44x160 | Vertical |
| SWRO-1500 | 1500 | 250 | 0.1-0.3 | 4-6.5 | 220/380 | 2.2 | 7.8Kwh/T | 65x44x160 | Vertical |
| SWRO-3000 | 3000 | 500 | 0.1-0.3 | 4-6.5 | 380 | 4.5 | 7Kwh/T | 95x60x180 | Vertical |
| SWRO-6000 | 6000 | 1000 | 0.1-0.3 | 4-6.5 | 380 | 7.5 | 6Kwh/T | 250x70x120 | Horizontal |
| SWRO-15K | 15000 | 2500 | 0.1-0.3 | 4-6.5 | 380 | 22 | 4Kwh/T | 250x120x170 | Horizontal |
| SWRO-30K | 30000 | 5000 | 0.1-0.3 | 4-6.5 | 380 | 40 | 3.5Kwh/T | ||
