Decorative Aluminum Panel EIFS Insulation Board Exterior Wall Panels
Weidi Decorative Insulation Board system performance index
Item | Detection standard | The third party test | ||
| JF149-2003, | After weather resistance test, | No damage such as | |
JG149-2003, | Impact-resistance strength | |||
Water absorption | JG149-2003, | ≤500 | 21 | |
Wind pressure | JG149-2003, | Not less than the wind load | After 15 kpa level wind | |
Freezing and | JG149-2003, | No surface cracking,hollowing, | No surface cracking, | |
Steam flow | JG149-2003, | ≥0.85 | 2.36 | |
Watertightness | JG149-2003, | Sample protective layer inside | Sample protective layer | |
Thermal conductivity | GB/T10801.1-2002, | ≤0.041 | 0.033 | |
Apparent density | GB/T10801.1-2002, | 18.0-22.0 | 19 | |
The compressive | GB/T10801.1-2002, | ≥0.10 | 0.10 | |
Dimensional | GB/T10801.1-2002, | ≤0.30 | Length Change 0.13 | |
Width Change 0.15 | ||||
Thickness Change 0.24 | ||||
Compression | GB/T10801.1-2002, | ≥60 | 99 | |
Water vapor | GB/T10801.1-2002, | ≤60 | 4 | |
Water absorption | GB/T10801.1-2002, | ≤6 | 2 | |
Tensile bond strength | Original | JG149-2003 | ≥0.60 | 0.94 |
Water | JG149-2003 | ≥0.40 | 0.54 | |
Tensile bond strength | Original | JG149-2003 | ≥0.10,Destroy interface on | ≥0.10,Destroy interface |
Water | JG149-2003 | ≥0.10,Destroy interface on | ≥0.10,Destroy interface | |
Operational time | JG149-2003 | 1.5-4.0 | 4.0 | |
Single anchor bolt | JG149-2003 | ≥0.30 | 0.83 | |
Weidi Decorative Insulation Board overall dimension specification
Test Item | Detection standard and requirements | The third party test results | ||
| Length(mm) | | ±1.5 | -1.0~0 |
Width(mm) | ±1.5 | -1.0~0.5 | ||
Thickness(mm) | ±0.5 | -0.2~0.1 | ||
Diagonal difference(mm) | ≤2.0 | 0.5 | ||
No straight degree in Border(mm/) | ≤2.0 | 0 | ||
Warping degree(mm/m) | ≤3.0 | 0 | ||
Description:
Decoration Veneer Layer: Multi Painting
Carrying Layer: Aluminium plate
Insulation Layer: Rock wood plate / PU Panel
Surface is repeatedly polished, permeated, waterproof , UV coating board is a a new type of inorganic fire
dalle high simulation baord used the special fiber reinforced cement as base material, after roller coating
and spray coating layer the fluorocarbon paint, then printing the prepaired natural stone colour and
pattern UV fluorocarbon film on the based board by the thermal transfer process,after that again roller
coating and spray coating layer the fluorocarbon paint , finally 13 times uv-curable process.
Applications:
Business Organizations | It is widely used in office building,hotel, High-end residential and other building’s decoration and insulation project. |
Competitive Advantage:
UV coating decorative insulation board due to the special surface patterns, which can be designed not
only like the stone but also can designed as the wood timber veneer. There for its surface can be used
not only indoor but also outdoor.
The features are:
Precious stone pattern, color, luster can be designed as required;
Impact resistance, uv resistance, weather resistance;
More than 25 years outdoor using life .
Waterproof, fireproof, pollution resistance, scratch resistant, friction resistance, acid and alkali
resistance;
