Heat Treatment CZ Purlin Roll Forming Machine With Hydraulic Punching For PEB
Main Details of C Z Channel Roll Forming Machine
Width :80mm-350mm
Height: 40mm-80mm
Small rib: 14mm-25mm
Coil thickness:1.2mm-3.5mm Q195~235, zinc coils & Hot Rolled coils
Working speed: 10-25m/min (not containing punching and cutting time )
Forming roller: 17steps
Leveling roller:5steps (up 2 and down 3)
Rectifying: one step
Feeding & guiding: 2 sets ,4 rollers
Material of roller: GCr15, quenched
Material of main shaft:45 steel
Main motor: 15KW
Feeding, leveling motor power: 7.5 KW
Hydraulic pressure: 15-20MPa
Hydraulic power: 7.5 KW
Two servo motor and four encoder
Transmission: Transmission by by Chains 1.2Inch double line
Main dimension: 11000mm x 1400mm x 1400mm (L x W x H)
Total weight: 14000kg
Compositions of C Z Channel Roll Forming Machine
NO. | Item | Unit | Qty |
1 | Roll forming main machine | set | 1 |
2 | Hdraulic/Manual Uncoiler | set | 1 |
3 | Control panel | set | 1 |
4 | Hydraulic station | set | 1 |
5 | Hydraulic punching | set | 1 |
6 | Hydraulic cutting | set | 1 |
7 | Manual out table | sets | 2 |
Steel Channel Section Size
Z steel channel size(mm) | |||||
model | H | B | b | C | T |
Z100 | 100 | 55 | 50 | 20 | 1.5-3.0 |
Z120 | 120 | 55 | 50 | 20 | 1.5-3.0 |
Z140 | 140 | 55 | 50 | 20 | 1.5-3.0 |
Z150 | 160 | 67 | 61 | 20 | 1.5-3.0 |
Z160 | 180 | 67 | 61 | 20 | 1.5-3.0 |
Z180 | 200 | 67 | 61 | 20 | 1.5-3.0 |
Z200 | 220 | 67 | 61 | 20 | 1.5-3.0 |
Z220 | 250 | 78 | 72 | 20 | 1.5-3.0 |
Z250 | 280 | 78 | 72 | 20 | 1.5-3.0 |
Z300 | 300 | 78 | 72 | 20 | 1.5-3.0 |
C steel channel size(mm) | ||||
model | H | B | C | T |
C80 | 80 | 40 | 15 | 1.5-3.0 |
C100 | 100 | 50 | 20 | 1.5-3.0 |
C120 | 120 | 50 | 20 | 1.5-3.0 |
C140 | 140 | 50 | 20 | 1.5-3.0 |
C160 | 160 | 60 | 20 | 1.5-3.0 |
C180 | 180 | 60 | 20 | 1.5-3.0 |
C200 | 200 | 60 | 20 | 1.5-3.0 |
C220 | 220 | 70 | 20 | 1.5-3.0 |
C250 | 250 | 70 | 20 | 1.5-3.0 |
C300 | 300 | 80 | 20 | 1.5-3.0 |
