Anti-abrasion water proof decorative insulation panel with UV coating for external wall decoration
Specifications:
Product | Performance | |||
UV coatingDecorative Insulation | Decoration |
| Water-resistant, fire-resistant, anti-pollution, anti-scratch, anti-abrasion, anti-acid , alkali resistance, impact resistance,UV-Resistance and weather resistance | Precious stone pattern, color, and gloss optional designed; Same using life for indoor use and building, the outdoor life is more than 25 years. |
| EPS insulation layer | Heat conductivity ≤0.041. volume-weight :18kg / m³ with the tensile strength:110--120kpa; volume-weight 20kg / m³ with the tensile strength :140kpa. | ||
XPS insulation Layer | Heat conductivity ≤0.030. Volume-weight 25--45kg / m³ & tensile ≥150kpa. Strong compressive resistance. 30-40 years average using life. Excenllent structure load-bearing performance . | |||
Polyurethane insulation board | Hard polyurethane with low thermal conductivity, good thermal performance. When the hard polyurethane with the density of 35 ~ 40kg / m3, thermal conductivity is only 0.018 ~ 0.024w / (m.k), equivalent to half of the EPS, is the lowest heat conductivity of all the insulation materials . | |||
TPS insulation board | Heat insulation thermal conductivity is 0.060W / (m · k) ,it has good tensile compressive strength , impact resistance and stability ; its compressive strength reaches 150-500KPa | |||
| Appearance quality: smooth surface, without prejudice practical scars, stains damaged. Combustion performance: non-combustible. Thermal load contraction temperature: 643 degrees. | |||
Phenolic Foam Board(Grade B Grade A) | Not be melt at high temperatures ,not be softened, with low smoke, non-proliferation flame resistance, flame penetration, There is no distortion, no burning ,no fire, being placed 10 minutes at 1400 , can effectively prevent the flames and smoke spread | |||
Weidi Decorative Insulation Board overall dimension specification
Test Item | Detection standard and requirements | The third party test results | ||
| Length(mm) | | ±1.5 | -1.0~0 |
Width(mm) | ±1.5 | -1.0~0.5 | ||
Thickness(mm) | ±0.5 | -0.2~0.1 | ||
Diagonal difference(mm) | ≤2.0 | 0.5 | ||
No straight degree in Border(mm/) | ≤2.0 | 0 | ||
Warping degree(mm/m) | ≤3.0 | 0 | ||
Weidi Decorative Insulation Board final product facing layer performance
(varieties: solid color/metal/stone/wood grain/special effects, etc.)
Test Item | Detection standard | The third party test results | |
Coating thickness(μm) | GB/T13452.2- | ≥30 | 199 |
Coating adhesion(MPa) | GB/T5210-2006 | ≥0.3 | 1.7(0.8-2.7),100%A |
Hardness(Pencil) | GB/T6739-2006 | ≥4H | 6H No scraping damage |
Abrasive resistance(750g/500r) | GB/T1768-2006 |
| 0.003 |
Solvent resistance wiping(Butanone, | HC/T-3792-2005 | No undercasing | Meet the requirement |
Acid-resistance(5%HC1 liquor,24H) | GB/T9274-1998 | No blistering,No Falling off,non-discolouring | No Change |
Alkali resistance | GB/T9274-1998 | No blistering,No Falling off,non-discolouring | No Change |
Abrasion performance | HC/T3793-2005- | ≥5 | 12 |
Stain resistance | GB/T9757-2001 | ≤5 | 5 |
Scrub resistance | GB/T9266-2009 | ≥10000 | >10000 |
Oil resistant(Immerse in engine oil SE15W-40 24H) | GB/T9274-198888 | No blistering,No Falling off,non-discolouring | No Change |
Alkali burnout resistance(72H) | JG/T210-2007 |
| No abnormalities |
Salting-out resistance(144H) | JG/T210-2007 |
| No abnormalities |
Weather resistance | GB/T1865-2009,GB/T1766-2008 | Artificial climate ageing and radiation exposure | 4000Hrs after testing,Dulling≤3Grade, |
Description:
Decoration Veneer Layer: UV Coating
Carrying Layer: Aluminium plate;Calcium silicate board;Cement pressure plate;
Insulation Layer: Rock wood plate
Surface is repeatedly polished, permeated, waterproof , UV coating board is a a new type of inorganic fire
dalle high simulation baord used the special fiber reinforced cement as base material, after roller coating
and spray coating layer the fluorocarbon paint, then printing the prepaired natural stone colour and
pattern UV fluorocarbon film on the based board by the thermal transfer process,after that again roller
coating and spray coating layer the fluorocarbon paint , finally 13 times uv-curable process.
Applications:
Business Organizations | It is widely used in office building,hotel, High-end residential and other building’s decoration and insulation project. |
Competitive Advantage:
UV coating decorative insulation board due to the special surface patterns, which can be designed not only
like the stone but also can designed as the wood timber veneer. There for its surface can be used not
only indoor but also outdoor.
The features are:
⇒Precious stone pattern, color, luster can be designed as required;
⇒Waterproof, fireproof, pollution resistance, scratch resistant, friction resistance, acid and alkali
resistance;
⇒Impact resistance, uv resistance, weather resistance;
⇒More than 25 years outdoor using life .
