Studio Flash Light 800WS Photography Equipment Flash Head Studio Equipment Digital Photography Lighting
Always Aluminum-Solid & Stable!
SPECIFICATIONS
| Type | E800 |
| Flash energy J (Ws) | 800 |
| GN (ISO 100) | 88 |
| Control range | 5 f-stops in 1/10 f-stop increments (1:32) |
| Recycle Time to full | 2~3S |
| Flash duration (t 0.5) | 1/1500~1/800 |
| Controls | Controls Illuminated digital display |
| Modeling Lamp Output | 250W |
| Flash Tube | Plug-in |
| Flash monitoring | Visual: Dim and boost function for modelling light Audible: Buzzer |
| Color Temperature | 5600K±200 |
| Flash Beam Width | 55° |
| Flash release | Slave Sensor / Synch Cable(Radio Trigger) / Test Button |
| Ready display | Visual and audible (can be switched off) signals when 100 % of selected energy is reached |
| Synch Voltage | 5V |
| Cooling Fan | Yes |
| Power Cable | 3 x 0,75 mm² H05VV-F 90°C |
| Amperage of Fuses | 10 A |
| Power Source | AC200-240V 50/60Hz |
| Weight kg | 3.2 |
| Dimension (L x W x H) | 54 x 21 x 27 |
| Quantity per carton | 3 sets |
PRODUCT CONTAINS
- E800 Digital Studio Strobe 1pcs
- 250W Modeling Lamp 1pcs
- 7” Standard Reflector 1pcs
- Synch Cable 1pcs
- Power Cable 1pcs
- Manual Booklet 1pcs
FEATURES
- Exquisite appearance, Top quality metal material housing;
- Light weight and easy to carry and operate;
- Single-chip Microcomputer controlling technology;
- Clear and Simple controlling Panel;
- Digital display window shows the accurate power level;
- 5 segment accurate power output from full to 1/32;
- Plug-in Flash tube for user replacing easily;
- Fast Recycle Time;
- Cooling fan available for any models;
- Build-in Slave Sensor;
- Red Eye Reduction Function.
HOW TO REPLACE THE PLUG-IN FLASH TUBE
If the unit does not flash but the ON/OFF switch indicates that there is power, it could be that the flash tube needs replacing.
- Turn off the main switch;
- Remove the power cable;
- Take the unit from its stand and put it on a rigid surface;
Please wait for several minutes until the modeling lamp and flash tube cool down; - Remove the flash tube and store the modeling lamp carefully;
- Replacing the flash tube as the procedure as follows ;
- Pull the flash tube out of the unit;
- Hold the replacement flash tube assembly, taking care to support both legs of the tube and locating the three brass sockets onto the plugs in the front of the unit gently but firmly;
- Push the flash tube into position.
- A clear glove should be used. Don’t touch the flash tube with your fingers because it will cause dark markings when it is used.
- Please check if the tube correctly aligned;
- Wind the trigger wire around the flash tube support.
- Re-connect and test the unit as usual.
CONTACTING INFORMATION
E-mail: info@simockphoto.com.cn
amandalee@simockphoto.com.cn
Skype: amanda_cn
Contacting: Ms. Amanda Lee (Export Manager)
