Mirror Polishing Aluminium Profile For Door and Window / decoration / industry
Material and status:
.
Chemical Composition |
6063 T5 |
||||||||
Si |
Fe |
Cu |
Mn |
Mg |
Zn |
Ti |
Cr |
Others |
total others |
0.2-0.6 |
M.0.35 |
M. 0.1 |
M. 0.1 |
0.45-0.9 |
M. 0.1 |
M. 0.1 |
M. 0.1 |
M. 0.05 |
0.15 |
Mechanical property |
|||||||||
Yield Strength |
Tensile Strength |
Extensibility |
hardness |
||||||
110Mpa |
160Mpa |
8% |
8 HW |
Including but not only including the list above.
Chemical Composition:
Technical Data:
Alloy |
Temper |
Thickness |
Tensile Strength |
Yield Strength |
Vickers Hardness |
Webster Hardness |
6005 |
T6 |
≤5 |
≥270MP |
≥225MP |
|
|
T6 |
5<e≤10 |
≥260MP |
≥215MP |
|
|
|
T6 |
10<e≤25 |
≥250MP |
≥200MP |
|
|
|
6060 |
T6 |
≤3 |
≥190MP |
≥150MP |
|
|
T6 |
3<e≤25 |
≥170MP |
≥140MP |
|
|
|
6061 |
T6 |
|
≥265MP |
≥245MP |
HV≥58 |
HW≥8 |
6063 |
T5 |
|
≥160MP |
≥110MP |
HV≥58 |
HW≥8 |
T6 |
|
≥205MP |
≥180MP |
HV≥58 |
HW≥8
|
Aluminum Profile meter weight( kg/m) tolerance
- Wall thickness 1.2 : ±5% kg/m
-
Wall thickness 1.0-1.1: ±7%kg/m
-
Wall thickness 0.8-0.9: ±8%kg/m
-
Wall thickness 0.6-0.7: ±10% kg/m
-
Wall thickness <0.6: ±12%kg/m
-
Anodized thickness: 8~12μm
Descrition:
Chemical Polished Aluminum profile is mainly applied in the top-end furniture such as curtain wall, closet, legs of table and chair, wardrobe, etc. The surface is much smoother than eletrophoresis aluminum profile. It has a mirror finish looking, smooth and shining. Its main market is for USA, European, East-South Asian, South American.
Have you met the problems with your supplier below?
- No suitable mould
- The quantity is too less to produce
- High rate in surface scratching
- Long production time
- Damaged in shipping
- Language problem
- Low efficiency because of time difference
Try MAXL, the professional manufacturer of aluminum profiles for South American market, ready to serve you at any time.
Competitive Advantages:
- Cost: The whole production lines are adopted, begin from aluminum ingot, minimize the cost from every single step.
- Quality: The modern management and advanced equipments create the stable and super quality.
E.G: The most advanced aluminum rod homogenizing furnaces are adopted to make the aluminum rod more stable.
Automatic digital control anodized production lines with advanced chemical polishing formula make the surface even and less flaw. The quality of the surface is much better than mechanical and manual operation.
- Service: Any request will be replied within 2