Single Milling Head Pipe Welding Machine
Quick Details
- Single milling head, 5.5kW/7.5kW;
- Milling thickness is up to 50mm, or customized;
- Advanced and high efficient milling equipment to prepare the groove of plate before welding instead of planing;
- Widely used in the industries as pressure vessel, boiler, ship-building, power plant, petrochemical and machinery, etc;
- There are single milling head and double milling head;
- It has the automatic hydraulic press jack and manual screw jack at the down position and press the work piece reliable, which can avoid the milling shaking and decrease the noise.
1. Introduction
This series machine is a kind of advanced and high efficient milling equipment to prepare the groove of plate before welding instead of planing. Compared with planer, it has the advantages of saving power, low investment and high accuracy of surface finish. It is widely used in the industries as pressure vessel, boiler, ship-building, power plant, petrochemical and machinery, etc.
There are single milling head and double milling head; and the milling head can be standard facer or molding facer for your options.
2. Main Parameters
Model |
XBJ6 |
XBJ9 |
XBJ12 |
XBJ15 |
XBJ18 |
Suitable plate length m |
6 |
9 |
12 |
15 |
18 |
Distance between hold-down and bed mm |
80 |
||||
Plate thickness mm |
6—50 |
||||
Milling angle ° |
0°—45° (can be altered) |
||||
Milling head model |
TX32A or TX40A |
||||
Power and revolution of milling head |
5.5kW, 1440rpm or 7.5kW, 1440rpm |
||||
Spindle revolution |
125—630 |
||||
Milling speed m/min |
0.13—1 |
||||
Fast forward and return speed m/min |
3.5 |
||||
Hydraulic pressure Mpa |
3.5 |
||||
Power supply |
AC380V, 50HZ, 3P or tailor made |
||||
Above are our standard models and parameters, and it can be designed and manufactured on request. |