3D Custom Advertising Full Color Mobile LED Billboard For Roadside
Quick Viewing
Pixel pitch is 0.31 inch (8mm) for outdoor usage;
Popular DIP246 led type, 1 red 1 green and 1 blue, traditional dip type led;
Physical density: 1452dots per square feet (15625 dots per square meters);
Module pixel configuration of W 32 × H 16 dots;
Module size is W 10.08 X H 5.04 inch (W 256 × H 128 mm);
Driving method is 1/4 can constant current;
MBI5041/MBI5024/JXI5020 of driving IC available;
With 85-264VAC large scale switching power supply input, typical value: 110VAC/220VAC;
Maximum power consumption is less than 83.61W/sq.ft (900W/);
Detailed Description
1. High level anti-shake: this is very important for movable LED screen;
2. LED screen truck rental has generator inside the truck to support move freely to any site needed without power supplying issue;
3. To insure truck LED screen is of high grade anti-shake, before the shipment, each cabinet has to pass a strict anti-vibration test to prevent the damages caused by any improper transportation;
4. For better protecting truck LED displays, it's always packaged with an independent anti-vibration flight case for a further protection to the display;
Popular Application
LED Display Truck Rental
Mobile Truck LED Display
Specifications
|
Led module parameters |
|
|
Screen model |
OC-MLB-P8DIP246 |
|
Pixel pitch (mm) |
8mm (0.31 inch) |
|
Pixel configuration |
1R1G1B |
|
Led encapsulation |
DIP246 |
|
Colors matches |
3:6:1 |
|
r chip wavelength range: 622-631nm;5nm |
Brightness range:900-1200mcd |
|
g chip wavelength range: 461-470nm;4nm |
Brightness range: 1400-1700mcd |
|
b chip wavelength range: 522-531nm;4nm |
Brightness range: 350-500mcd |
|
Module resolution (w x h pixels) |
W 32 x H 16 pixels |
|
Module size (w x h inch) |
W 10.08 x H 5.04 inch (w256 x h128 mm) |
|
Module pixel |
512 pixels |
|
Module plainness |
≤1mm |
|
Led cabinet parameters |
|
|
Cabinet size (w x h inch) |
Could be adjustable by demands |
|
Cabinet color |
Customized |
|
Cabinet material |
Steel/aluminum |
|
Led display parameters |
|
|
Pixel density (pixel/sq. ft) |
1452 pixel per sq.ft (15625pixels/sq. m) |
|
Brightness (cd per sq.ft) |
≥604 cd per sq.ft (6500 cd per sq.m) |
|
Brightness adjusted |
100 grade by software or by Auto-optic induced |
|
View angle |
Horizontal 110°; Vertical 55° |
|
Best viewing distance (ft) |
≥26 ft (8 m) |
|
Communication distance ( ft ) |
<328 ft (100 m) by Internet Cable(without Relay; Multi mode fiber cable 1650 ft (500m); Single mode; fiber cable 12.5 mi (20km) |
|
Display work method |
1/4 Scan |
|
Driving IC |
MBI5041/MBI5024/JXI5020 |
|
LED driving method |
Constant driving current |
|
Color contrast ratio |
1800:1 |
|
Gray Grade |
16bit |
|
Refresh Frequency (Hz) |
≥960 Hz |
|
Picture display method |
Intellective control technology , test-itself technology , correct technology, Synchronization Control |
|
Input signal |
DVI (S-VIDEO, CVBS, ,DP,HDMI,VGA, PAL/NTSC, etc. through Video processor converting ) |
|
System operating |
WINDOWS 98, WINDOWS 2000, WINDOWS XP,WINDOWS 7 etc. |
|
Front/Rear IP Level |
Front: IP65; Rear: IP54 |
|
Working temperature(ºC) |
-20+60 |
|
Stored temperature (ºC) |
-30+80 |
|
Operation humidity(RH) |
0-95% |
|
Display Lifetime(hours) |
10 years or more( natural environment) 100000 hours( ideal environment) |
|
Maintenance |
Rear-maintained |
|
Pixel out of control |
less than 1/ 10, dispersion state |
|
Working Voltage |
AC110 / AC220V±10% 4763HZ |
|
Max power consumption |
Max: 84 W/sq.ft (900W/) |
|
Average power consumption |
Ave: 37 w/sq.ft (400 W/) |
|
Out of controlled dot |
≤3/10,000 (Out of controlled dots means the pixels of which the brightness and the wave length are both >10% depart to the normal one) |
