Serrated flange nuts are hex flange nuts with a serrated bearing surface.
The nut turns freely until the serrations contact and displace material on the mating surface as the nut is tightened; less torque is needed to install than remove because the gripping action of the serrations create a ratchet-type locking feature that is resistant to vibration.
If the mating surface is painted or plated, corrosion can occur if the nut's wiping action removes the surface treatment.
The protruding circular flange increases the bearing surface of the nut allowing it to be used with irregular and oversized holes.
Used in commercial and industrial applications, serrated flange nuts are also called: serrated face lock nuts, serrated tooth nuts, spin lock nuts, whiz lock nuts.
Because the serrations must contact the mating surface to "lock", serrated flange nuts are not used with flat or lock washers.
Size: M6/M8/M10/M12/M14/M16/M20
Thread type: metric corse/fine right-hand thread
imperial thread is available upon request
left-hand thread is available upon request
Material: steel
Grade: 4.8/6.8/8.8/10.9/12.9
Finish: plain/black oxide/zinc plated (galvanized)/hot dip galvanized (HDG)
other kinds of surface treatment are upon request
Technical info: DIN 6923
.jpg)
.jpg)
.jpg)
